Publications

Found 60 results

Sort by: [ Author (Desc)] Title Type Year
Filters: Author is Ghosh,P. C.  [Clear All Filters]
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
T
Thakare, M. S., P. C. Ghosh, and S. Bandyopadhyay. "Optimal sizing of a photovoltaic-thermal hybrid system using energy ratio." Chemical Engineering Transactions 45 (2015): 373-378.
Thakare, M. S., G. S. Krishna Priya, P. C. Ghosh, and S. Bandyopadhyay. "Optimization of photovoltaic-thermal (PVT) based cogeneration system through water replenishment profile." Solar Energy 133 (2016): 512-523.
Thakare, M. S., P. C. Ghosh, and S. Bandyopadhyay. "Utilisation of excess energy in the sizing of photovoltaic-thermal system (PVT) using design space approach." Chemical Engineering Transactions 45 (2015): 1609-1614.
S
Sonawane, J. M., A. Yadav, P. C. Ghosh, and S. B. Adeloju. "Recent advances in the development and utilization of modern anode materials for high performance microbial fuel cells." Biosensors and Bioelectronics 90 (2017): 558-576.
Sonawane, J. M., P. C. Ghosh, and S. B. Adeloju. "Electrokinetic behaviour of conducting polymer modified stainless steel anodes during the enrichment phase in microbial fuel cells." Electrochimica Acta 287 (2018): 96-105.
Sonawane, J. M., S. Al-Saadi, R. K. Singh Raman, P. C. Ghosh, and S. B. Adeloju. "Exploring the use of polyaniline-modified stainless steel plates as low-cost, high-performance anodes for microbial fuel cells." Electrochimica Acta 268 (2018): 484-493.
Sonawane, J. M., S. B. Adeloju, and P. C. Ghosh. "Landfill leachate: A promising substrate for microbial fuel cells." International Journal of Hydrogen Energy 42 (2017): 23794-23798.
Sonawane, J. M., A. Gupta, and P. C. Ghosh. "Multi-electrode microbial fuel cell (MEMFC): A close analysis towards large scale system architecture." International Journal of Hydrogen Energy 38 (2013): 5106-5114.
Sonawane, J. M., D. Pant, P. C. Ghosh, and S. B. Adeloju. "Fabrication of a Carbon Paper/Polyaniline-Copper Hybrid and Its Utilization as an Air Cathode for Microbial Fuel Cells." ACS Applied Energy Materials 2 (2019): 1891-1902.
Sonawane, J. M., S. A. Patil, P. C. Ghosh, and S. B. Adeloju. "Low-cost stainless-steel wool anodes modified with polyaniline and polypyrrole for high-performance microbial fuel cells." Journal of Power Sources 379 (2018): 103-114.
Sonawane, J. M., D. Pant, P. C. Ghosh, and S. B. Adeloju. "Polyaniline-copper composite: A non-precious metal cathode catalyst for low-temperature fuel cells." Energy and Fuels 35 (2021): 3385-3395.
Sonawane, J. M., C. I. Ezugwu, and P. C. Ghosh. "Microbial Fuel Cell-Based Biological Oxygen Demand Sensors for Monitoring Wastewater: State-of-the-Art and Practical Applications." ACS Sensors 5 (2020): 2297-2316.
Singh, R., M. K. Singh, S. Bhartiya, A. Singh, D. K. Kohli, P. C. Ghosh, S. Meenakshi, and P. K. Gupta. "Facile synthesis of highly conducting and mesoporous carbon aerogel as platinum support for PEM fuel cells." International Journal of Hydrogen Energy 42 (2017): 11110-11117.
Singdeo, D., T. Dey, and P. C. Ghosh. "Modelling of start-up time for high temperature polymer electrolyte fuel cells." Energy 36 (2011): 6081-6089.
Singdeo, D., T. Dey, and P. C. Ghosh. "Three dimensional computational fluid dynamics modelling of high temperature polymer electrolyte fuel cell." Applied Mechanics and Materials 492 (2014): 365-369.
Singdeo, D., T. Dey, and P. C. Ghosh. "Contact resistance between bipolar plate and gas diffusion layer in high temperature polymer electrolyte fuel cells." International Journal of Hydrogen Energy 39 (2014): 987-995.
Singdeo, D., T. Dey, S. Gaikwad, S. J. Andreasen, and P. C. Ghosh. "A new modified-serpentine flow field for application in high temperature polymer electrolyte fuel cell." Applied Energy 195 (2017): 13-22.
R
Raj, A. S., and P. C. Ghosh. "Standalone PV-diesel system vs. PV-H2 system: An economic analysis." Energy 42 (2012): 270-280.
N
Nayak, R., M. Sundarraman, P. C. Ghosh, and A. R. Bhattacharyya. "Doped poly (2, 5-benzimidazole) membranes for high temperature polymer electrolyte fuel cell: Influence of various solvents during membrane casting on the fuel cell performance." European Polymer Journal 100 (2018): 111-120.
Nayak, R., T. Dey, P. C. Ghosh, and A. R. Bhattacharyya. "Phosphoric acid doped poly(2,5-benzimidazole)-based proton exchange membrane for high temperature fuel cell application." Polymer Engineering and Science 56 (2016): 1366-1374.
M
Meenakshi, S., and P. C. Ghosh. "Study of an Innovative Versatile Flow Design Suitable for Fuel Cells." Journal of Electrochemical Energy Conversion and Storage 14 (2017).
Maskarenj, M. S., M. Avasare, and P. C. Ghosh. "Analysis of plastic optical fiber based daylight system suitable for building applications." Applied Mechanics and Materials 492 (2014): 101-105.
Maskarenj, M., G. Chawla, R. Banerjee, and P. C. Ghosh. "Evaluation of dynamic sky-type using novel angular sky luminance measurement system." Building and Environment 146 (2018): 152-165.
Maskarenj, M., R. Banerjee, and P. C. Ghosh. "A low cost sky-scanning device as centralized sensor for realtime light control in building management application." In Optics InfoBase Conference Papers. Vol. Part F118-EE 2018., 2018.
Maskarenj, M. S., R. Chavali, A. Mathur, P. C. Ghosh, and S. K. Mitra. "Mitigation of biofouling through in-plane application of weak DC current in presence of antimicrobials." In ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2015, collocated with the ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems., 2015.

Department of Energy Science and Engineering Indian Institute of Technology Bombay Powai, Mumbai - 400076, INDIA

© 2022 All rights reserved, IIT Bombay