Publications

Found 214 results

Sort by: Author Title [ Type (Desc)] Year
Filters: First Letter Of Last Name is P  [Clear All Filters]
Journal Article
Pyakurel, M., K. Nawandar, V. Ramadesigan, and S. Bandyopadhyay. "Capacity expansion of power plants using dynamic energy analysis." Clean Technologies and Environmental Policy 23 (2021): 669-683.
Praveen Kumar, K., and S. Srinivas. "Catalytic Co-pyrolysis of Biomass and Plastics (Polypropylene and Polystyrene) Using Spent FCC Catalyst." Energy and Fuels 34 (2020): 460-473.
Pandey, V., and S. Singh. "Characterization of stability limits of Ledinegg instability and density wave oscillations for two-phase flow in natural circulation loops." Chemical Engineering Science 168 (2017): 204-224.
Shah, P. R., S. Patel, S. Bhanushali, and A. Ganesh. "A Comparative study of use of fuel additives in straight vegetable oil and pre-heated straight vegetable oil on combustion and emission characteristics of CI engine." SAE Technical Papers 5 (2013).
Daggupati, S., R. N. Mandapati, S. M. Mahajani, A. Ganesh, A. K. Pal, R. K. Sharma, and P. Aghalayam. "Compartment modeling and flow characterization in nonisothermal underground coal gasification cavities." Industrial and Engineering Chemistry Research 51 (2012): 4493-4508.
Daggupati, S., R. N. Mandapati, S. M. Mahajani, A. Ganesh, A. K. Pal, R. K. Sharma, and P. Aghalayam. "Compartment modeling for flow characterization of underground coal gasification cavity." Industrial and Engineering Chemistry Research 50 (2011): 277-290.
Sahoo, S. S., P. K. Satapathy, P. K. Parhi, A. Rout, and S. Thomas. "Conjugate Heat Transfer Analysis of Solar Cooker Cavity Using CFD Approach." Lecture Notes in Mechanical Engineering 29 (2021): 601-609.
Panchal, V., U. Bhandarkar, M. Neergat, and K. G. Suresh. "Controlling magnetic properties of iron oxide nanoparticles using post-synthesis thermal treatment." Applied Physics A: Materials Science and Processing 114 (2014): 537-544.
Lv, P., Z. Liu, A. K. Patel, X. Zhou, and J. Huot. "Correction to: Influence of Ball Milling, Cold Rolling and Doping (Zr + 2Cr) on Microstructure, First Hydrogenation Properties and Anti-poisoning Ability of TiFe Alloy (Metals and Materials International, (2021), 27, 5, (1346-1357), 10.1007/s12540-019-005." Metals and Materials International 27 (2021): 1358.
Pandey, B., R. Banerjee, and A. Sharma. "Coupled EnergyPlus and CFD analysis of PCM for thermal management of buildings." Energy and Buildings 231 (2021).
Patra, B. C., S. K. Das, A. Ghosh, A. K. Raj, P. Moitra, M. Addicoat, S. Mitra, A. Bhaumik, S. Bhattacharya, and A. Pradhan. "Covalent organic framework based microspheres as an anode material for rechargeable sodium batteries." Journal of Materials Chemistry A 6 (2018): 16655-16663.
Paul, S., and S. Singh. "A density variant drift flux model for density wave oscillations." International Journal of Heat and Mass Transfer 69 (2014): 151-163.
Garg, H., B. Pandey, S. K. Saha, S. Singh, and R. Banerjee. "Design and analysis of PCM based radiant heat exchanger for thermal management of buildings." Energy and Buildings 169 (2018): 84-96.
Pandey, V., and S. Singh. "Detailed bifurcation analysis with a simplified model for advance heavy water reactor system." Communications in Nonlinear Science and Numerical Simulation 20 (2015): 186-198.
Prakash, M., S. B. Kedare, and J. K. Nayak. "Determination of stagnation and convective zones in a solar cavity receiver." International Journal of Thermal Sciences 49 (2010): 680-691.
Singh, M. P., S. Paul, and S. Singh. "Development of a novel nodalized reduced order model for stability analysis of supercritical fluid in a heated channel." International Journal of Thermal Sciences 137 (2019): 650-664.
Majumder, S., S. A. Khaparde, A. P. Agalgaonkar, P. Ciufo, S. Perera, and S. V. Kulkarni. "DFT-Based Sizing of Battery Storage Devices to Determine Day-Ahead Minimum Variability Injection Dispatch with Renewable Energy Resources." IEEE Transactions on Smart Grid 10 (2019): 626-638.
Lee, S. B., C. Pathak, V. Ramadesigan, W. Gao, and V. R. Subramanian. "Direct, efficient, and real-time simulation of physics-based battery models for stand-alone PV-battery microgrids." Journal of the Electrochemical Society 164 (2017): E3026-E3034.
Patidar, S., S. Kumar, A. Srivastava, and S. Singh. "Dual phase lag model-based thermal analysis of tissue phantoms using lattice Boltzmann method." International Journal of Thermal Sciences 103 (2016): 41-56.
Patankar, A., A. Makawana, and M. Bose. "Dune formation in horizontal pneumatic conveying system." Lecture Notes in Mechanical Engineering (2017): 1609-1616.
Patel, R. N., S. Bandyopadhyay, and A. Ganesh. "Economic appraisal of supercritical fluid extraction of refined cashew nut shell liquid." Journal of Chromatography A 1124 (2006): 130-138.
Patel, A. K., B. Tougas, P. Sharma, and J. Huot. "Effect of cooling rate on the microstructure and hydrogen storage properties of TiFe with 4 wt% Zr as an additive." Journal of Materials Research and Technology 8 (2019): 5623-5630.
Makwana, A. B., A. Patankar, and M. Bose. "Effect of dune formation on pressure drop in horizontal pneumatic conveying system." Particulate Science and Technology 33 (2015): 59-66.
Kumar, A., S. Maurya, S. Chawla, S. Patwardhan, and B. Kavaipatti. "Effect of thickness on metal to semiconductor transition in la doped BaSnO3 films deposited on high mismatch LSAT substrates." Applied Physics Letters 114 (2019).
Panchal, V., G. Lahoti, U. Bhandarkar, and M. Neergat. "The effects of process parameters on yield and properties of iron nanoparticles from ferrocene in a low-pressure plasma." Journal of Physics D: Applied Physics 44 (2011).

Department of Energy Science and Engineering Indian Institute of Technology Bombay Powai, Mumbai - 400076, INDIA

© 2024 All rights reserved, IIT Bombay