Publications

Found 234 results

Sort by: Author Title [ Type (Asc)] Year
Filters: First Letter Of Last Name is D  [Clear All Filters]
Journal Article
Golive, Y. R., A. Kottantharayil, J. Vasi, N. Shiradkar, S. Zachariah, R. Dubey, S. Chattopadhyay, S. Bhaduri, H. K. Singh, B. Bora et al. "Analysis of Field Degradation Rates Observed in All-India Survey of Photovoltaic Module Reliability 2018." IEEE Journal of Photovoltaics 10 (2020): 560-567.
Soni, N., S. Doolla, and M. C. Chandorkar. "Analysis of Frequency Transients in Isolated Microgrids." IEEE Transactions on Industry Applications 53 (2017): 5940-5951.
Das, S., V. S. S. P. K. Hari, A. Kumar, and G. Narayanan. "Analysis of generalized continual-clamp and split-clamp PWM schemes for induction motor drive." Sadhana - Academy Proceedings in Engineering Sciences 44 (2019).
Datta, D., V. H. Gada, and A. Sharma. "Analytical and level-set method-based numerical study for two-phase stratified flow in a plane channel and a square duct." Numerical Heat Transfer; Part A: Applications 60 (2011): 347-380.
Gada, V. H., D. Datta, and A. Sharma. "Analytical and numerical study for two-phase stratified-flow in a plane channel subjected to different thermal boundary conditions." International Journal of Thermal Sciences 71 (2013): 88-102.
Dhariwal, J., and R. Banerjee. "An approach for building design optimization using design of experiments." Building Simulation 10 (2017): 323-336.
Adil, M., P. K. Dutta, and S. Mitra. "An Aqueous Ca-ion Full Cell Comprising BaHCF Cathode and MCMB Anode." ChemistrySelect 3 (2018): 3687-3690.
Nandi, D. K., U. K. Sen, S. Sinha, A. Dhara, S. Mitra, and S. K. Sarkar. "Atomic layer deposited tungsten nitride thin films as a new lithium-ion battery anode." Physical Chemistry Chemical Physics 17 (2015): 17445-17453.
Dhara, A., D. Saha, S. Mitra, and S. K. Sarkar. "Atomic layer deposition of nitrogen incorporated molybdenum oxide: Unveiling carrier transport mechanism and its application in Li-ion battery." Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films 38 (2020).
Raj K, A., M. R. Panda, D. P. Dutta, and S. Mitra. "Bio-derived mesoporous disordered carbon: An excellent anode in sodium-ion battery and full-cell lab prototype." Carbon 143 (2019): 402-412.
Shrivastava, P., A. K. Singh, R. Teotia, S. Dalai, P. Sharma, S. Vijayalakshmi, and J. R. Bellare. "Bioglass based nano-materials for bone tissue engineering." Advanced Science Letters 20 (2014): 1129-1134.
Ahmad, S., A. Singh, A. Bohra, R. Basu, S. Bhattacharya, R. Bhatt, K. N. Meshram, M. Roy, S. K. Sarkar, Y. Hayakawa et al. "Boosting thermoelectric performance of p-type SiGe alloys through in-situ metallic YSi2 nanoinclusions." Nano Energy 27 (2016): 282-297.
Chandramohan, L. S., G. Ravikumar, S. Doolla, and S. A. Khaparde. "Business process model for deriving CIM profile: A case study for indian utility." IEEE Transactions on Power Systems 30 (2015): 132-141.
Malik, S. N., P. C. Ghosh, A. N. Vaidya, V. Waindeskar, S. Das, and S. N. Mudliar. "Comparison of coagulation, ozone and ferrate treatment processes for color, COD and toxicity removal from complex textile wastewater." Water Science and Technology 76 (2017): 1001-1010.
Desai, N. B., and S. Bandyopadhyay. "Comparison of parabolic trough and linear Fresnel collectors based concentrating solar power plants using organic Rankine cycle." Chemical Engineering Transactions 45 (2015): 1597-1602.
Daggupati, S., R. N. Mandapati, S. M. Mahajani, A. Ganesh, A. K. Pal, R. K. Sharma, and P. Aghalayam. "Compartment modeling and flow characterization in nonisothermal underground coal gasification cavities." Industrial and Engineering Chemistry Research 51 (2012): 4493-4508.
Daggupati, S., R. N. Mandapati, S. M. Mahajani, A. Ganesh, A. K. Pal, R. K. Sharma, and P. Aghalayam. "Compartment modeling for flow characterization of underground coal gasification cavity." Industrial and Engineering Chemistry Research 50 (2011): 277-290.
Singdeo, D., T. Dey, and P. C. Ghosh. "Contact resistance between bipolar plate and gas diffusion layer in high temperature polymer electrolyte fuel cells." International Journal of Hydrogen Energy 39 (2014): 987-995.
Dhara, A., S. K. Sarkar, and S. Mitra. "Controlled 3D Carbon Nanotube Architecture Coated with MoOx Material by ALD Technique: A High Energy Density Lithium-Ion Battery Electrode." Advanced Materials Interfaces 4 (2017).
Gupta, Y., K. Chatterjee, and S. Doolla. "Controller design, analysis and testing of a three-phase VSI using IDA-PBC approach." IET Power Electronics 13 (2020): 346-355.
Chattopadhyay, S., R. Dubey, S. Bhaduri, S. Zachariah, H. K. Singh, C. S. Solanki, A. Kottantharayil, N. Shiradkar, B. M. Arora, K. L. Narasimhan et al. "Correlating infrared thermography with electrical degradation of PV modules inspected in all-india survey of photovoltaic module reliability 2016." IEEE Journal of Photovoltaics 8 (2018): 1800-1808.
Bandyopadhyay, S., and N. B. Desai. "Cost optimal energy sector planning: a Pinch Analysis approach." Journal of Cleaner Production 136 (2016): 246-253.
Patra, B. C., S. K. Das, A. Ghosh, A. K. Raj, P. Moitra, M. Addicoat, S. Mitra, A. Bhaumik, S. Bhattacharya, and A. Pradhan. "Covalent organic framework based microspheres as an anode material for rechargeable sodium batteries." Journal of Materials Chemistry A 6 (2018): 16655-16663.
Dheer, D. K., Y. Gupta, and S. Doolla. "Decentralised inverter control for improved reactive power sharing and voltage profile in a microgrid." IET Generation, Transmission and Distribution 15 (2021): 1227-1241.
Nunna, H. S. V. S. K., and S. Doolla. "Demand response in smart distribution system with multiple microgrids." IEEE Transactions on Smart Grid 3 (2012): 1641-1649.

Department of Energy Science and Engineering Indian Institute of Technology Bombay Powai, Mumbai - 400076, INDIA

© 2024 All rights reserved, IIT Bombay