] Filters: First Letter Of Last Name is D [Clear All Filters]
"Simulation based mixed mode building design." In Materials Today: Proceedings, 23391-23403. Vol. 5., 2018.
"An approach for building design optimization using design of experiments." Building Simulation 10 (2017): 323-336.
"Naturally ventilated building design under uncertainty using design of experiments." In 14th International Conference of IBPSA - Building Simulation 2015, BS 2015, Conference Proceedings, 1708-1715., 2015.
"Controlled 3D Carbon Nanotube Architecture Coated with MoOx Material by ALD Technique: A High Energy Density Lithium-Ion Battery Electrode." Advanced Materials Interfaces 4 (2017).
"Two stage chemical bath deposition of MoO3 nanorod films." RSC Advances 4 (2014): 53694-53700.
"Atomic layer deposition of nitrogen incorporated molybdenum oxide: Unveiling carrier transport mechanism and its application in Li-ion battery." Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films 38 (2020).
"Efficacy of chemical oxidation and coagulation for cod and color reduction from pulp mill effluent." Journal of Environmental Engineering (United States) 138 (2012): 1194-1199.
"Study of contact resistance at the electrode-interconnect interfaces in planar type Solid Oxide Fuel Cells." Journal of Power Sources 233 (2013): 290-298.
"Transition metal-doped yttria stabilized zirconia for low temperature processing of planar anode-supported solid oxide fuel cell." Journal of Alloys and Compounds 604 (2014): 151-156.
"Influence of microstructure on nano-mechanical properties of single planar solid oxide fuel cell in pre- and post-reduced conditions." Materials and Design 53 (2014): 182-191.
"SOFC power generation system by bio-gasification." In Energy Procedia, 748-755. Vol. 54., 2014.
"Diagnosis of scale up issues associated with planar solid oxide fuel cells." International Journal of Hydrogen Energy 36 (2011): 9967-9976.
"Improvement in solid oxide fuel cell performance through design modifications: An approach based on root cause analysis." International Journal of Hydrogen Energy 39 (2014): 17258-17266.
"Recovery of active surface sites of shape-controlled platinum nanoparticles contaminated with halide ions and its effect on surface-structure." Journal of the Electrochemical Society 164 (2017): H551-H560.
"Reconstruction and dissolution of shape-controlled Pt nanoparticles in acidic electrolytes." Physical Chemistry Chemical Physics 18 (2016): 11220-11232.
"Electrocatalysis of Oxygen Reduction Reaction on Shape-Controlled Pt and Pd Nanoparticles—Importance of Surface Cleanliness and Reconstruction." Frontiers in Chemistry 7 (2019).
"Effect of vibrations on performance of polymer electrolyte membrane fuel cells." In Energy Procedia, 756-762. Vol. 54., 2014.
"Particle velocity distribution in a flow of gas-solid mixture through a horizontal channel." Powder Technology 298 (2016): 119-129.
"Efficient feed preheat targeting for distillation by feed splitting." Computer Aided Chemical Engineering 20 (2005): 751-756.
Bioenergy and food production: Appropriate allocation for future development In The Water-Food-Energy Nexus: Processes, Technologies, and Challenges., 2017.
"Process integration of organic Rankine cycle." Energy 34 (2009): 1674-1686.
"Optimization of fin volume for PCM based heat sink." In International Conference on Computational Methods for Thermal Problems, 75-78., 2018.
"Numerical investigations of fin efficacy for phase change material (PCM) based thermal control module." International Journal of Heat and Mass Transfer 147 (2020).
"Optimization of design radiation for concentrating solar thermal power plants without storage." Solar Energy 107 (2014): 98-112.