Publications

List
Filter

Found 1146 results

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Dheer, D. K., N. Soni, and S. Doolla. "Improvement of small signal stability margin and transient response in inverter-dominated microgrids." Sustainable Energy, Grids and Networks 5 (2016): 135-147.

Dheer, D. K., A. S. Vijay, O. V. Kulkarni, and S. Doolla. "Improvement of stability margin of droop-based islanded microgrids by cascading of lead compensators." IEEE Transactions on Industry Applications 55 (2019): 3241-3251.

Soni, N., S. Doolla, and M. C. Chandorkar. "Improvement of transient response in microgrids using virtual inertia." IEEE Transactions on Power Delivery 28 (2013): 1830-1838.

Nayak, P., S. Mandal, Y. Gupta, A. Shukla, and S. Doolla. "Improving the efficiency of the DAB converter of an on-board EV charger using different modulation techniques." In 9th IEEE International Conference on Power Electronics, Drives and Energy Systems, PEDES 2020., 2020.

Ghosh, A., and S. Mitra. "In Situ Surface Coating of Squaric Acid with Conductive Polyaniline for a High-Capacity and Sustainable Lithium Battery Anode." ChemElectroChem 5 (2018): 159-165.

Nunna, H. S. V. S. K., B. Azibek, A. Khamitov, P. K. Jamwal, A. K. Rathore, and S. Doolla. "Increasing Hosting Capacity of Distribution Networks by Microgrid Reactive Power Management." In 2020 IEEE International Conference on Power Electronics, Smart Grid and Renewable Energy, PESGRE 2020., 2020.

Rout, A., B. Mainali, S. Singh, and C. S. Solanki. "An index-based generic framework for tracking the quality of supplied electricity." Energy Sources, Part B: Economics, Planning and Policy 16 (2021): 478-490.

Chaturvedi, N. D., and S. Bandyopadhyay. "Indirect thermal integration for batch processes." Applied Thermal Engineering 62 (2014): 229-238.

Joshi, A. P., M. C. Raval, A. Kottantharayil, and C. S. Solanki. "Inductively Coupled Plasma Atomic Emission Spectroscopy: A bulk analysis and process monitoring technique for silicon solar cell fabrication." In Conference Record of the IEEE Photovoltaic Specialists Conference, 511-515., 2013.

Soni, N., S. Doolla, and M. C. Chandorkar. "Inertia Design Methods for Islanded Microgrids Having Static and Rotating Energy Sources." IEEE Transactions on Industry Applications 52 (2016): 5165-5174.

Lv, P., Z. Liu, A. K. Patel, X. Zhou, and J. Huot. "Influence of Ball Milling, Cold Rolling and Doping (Zr + 2Cr) on Microstructure, First Hydrogenation Properties and Anti-poisoning Ability of TiFe Alloy." Metals and Materials International 27 (2021): 1346-1357.

Singha, B., and C. S. Solanki. "Influence of boron rich layer on quantum efficiencies in p +-n-n + Si structures during diffusion of boron spin on dopant source." Materials Research Express 5 (2018).

Kumar, S., and R. Gupta. "Influence of cell packaging and design parameters on thermo-mechanical reliability of fingers in crystalline silicon photovoltaic modules." In AIP Conference Proceedings. Vol. 2147., 2019.

Somasundaran, P., and R. Gupta. "Influence of local shunting on the electrical performance in industrial Silicon solar cells." Solar Energy 139 (2016): 581-590.

Dey, T., A. Dey, P. C. Ghosh, M. Bose, A. K. Mukhopadhyay, and R. N. Basu. "Influence of microstructure on nano-mechanical properties of single planar solid oxide fuel cell in pre- and post-reduced conditions." Materials and Design 53 (2014): 182-191.

Raveendran, K., A. Ganesh, and K. C. Khilar. "Influence of mineral matter on biomass pyrolysis characteristics." Fuel 74 (1995): 1812-1822.

Bera, B., T. Kar, A. Chakraborty, and M. Neergat. "Influence of nitrogen-doping in carbon on equivalent distributed resistance and capacitance – Implications to electrocatalysis of oxygen reduction reaction." Journal of Electroanalytical Chemistry 805 (2017): 184-192.

Das, P., A. Ganesh, and P. Wangikar. "Influence of pretreatment for deashing of sugarcane bagasse on pyrolysis products." Biomass and Bioenergy 27 (2004): 445-457.

Shah, P. R., U. N. Gaitonde, and A. Ganesh. "Influence of soy-lecithin as bio-additive with straight vegetable oil on CI engine characteristics." Renewable Energy 115 (2018): 685-696.

Pise, M. T., S. Srinivas, A. Chatterjee, B. P. Kashyap, R. N. Singh, and S. S. V. Tatiparti. "Influence of surface condition on the current densities rendering nucleation loop during cyclic voltammetry for electrodeposition of Pd thin films." Surfaces and Interfaces 20 (2020).

Pandya, N. S., A. N. Desai, A. Kumar Tiwari, and Z. Said. "Influence of the geometrical parameters and particle concentration levels of hybrid nanofluid on the thermal performance of axial grooved heat pipe." Thermal Science and Engineering Progress 21 (2021).

Subbiah, A. S., A. Halder, S. Ghosh, N. Mahuli, G. Hodes, and S. K. Sarkar. "Inorganic hole conducting layers for perovskite-based solar cells." Journal of Physical Chemistry Letters 5 (2014): 1748-1753.

Bera, S., A. Roy, A. K. Guria, S. Mitra, and N. Pradhan. "Insights of Diffusion Doping in Formation of Dual-Layered Material and Doped Heterostructure SnS-Sn:Sb 2 S 3 for Sodium Ion Storage." Journal of Physical Chemistry Letters 10 (2019): 1024-1030.

Nakarmi, A. M., T. Mishra, and R. Banerjee. "Integrated MAED–MARKAL-based analysis of future energy scenarios of Nepal." International Journal of Sustainable Energy 35 (2016): 968-981.

Kanitkar, T., R. Banerjee, and T. Jayaraman. "An integrated modeling framework for energy economy and emissions modeling: A case for India." Energy 167 (2019): 670-679.

Department of Energy Science and Engineering Indian Institute of Technology Bombay Powai, Mumbai - 400076, INDIA