Home About Teaching Students Publications Recreational Mathematics Links Contacts


List of Publications




Book Chapter Journal Editorial Conference Magazine





Books and Edited Books

  1. V. Andiappan, D. K. S. Ng, and S. Bandyopadhyay (Editors), Optimization for Energy Systems and Supply Chains: Fundamentals and Applications (ISBN: 978-1-032-14621-8), CRC Press, Boka Raton, 2023.
  2. A. Roy and S. Bandyopadhyay, Wind Power Based Isolated Energy Systems (ISBN: 978-3-030-00541-2), Springer, Cham, Switzerland, 2019.
  3. S. De, S. Bandyopadhyay, M. Assadi, and D. A. Mukherjee (Editors), Sustainable Energy Technology and Policies: A Transformational Journey (ISBN: 978-981-10-7187-4), Volume 1 & Volume 2, Springer, Singapore, 2018.



Book Chapters

  1. S. Bandyopadhyay, Power Pinch Analysis, In: Handbook of Process Integration (PI): Minimisation of Energy and Water Use, Waste and Emissions (ISBN: 978-0-12-823850-9), Eds. J. J. Klemeš, Woodhead Pub. Ltd., Cambridge, US, 1043-1060, 2023.
  2. Krishna Priya G.S., G. G. Pillai, A. Jana, A. Sarkar, N. Thomas, T. Crosbie, D. A. Ghanem, G. Waller, A. Divers, D. Newbury-Birch, and S. Bandyopadhyay, Evolution of Electricity Sector in India: Toward Smart Metering and Sustainable Development, In: Advances in Urban Design and Engineering (ISBN: 9789811904127), Ed. P. Banerji and A. Jana, Springer, Singapore., 217-235, 2022.
  3. Krishna Priya G.S. and S. Bandyopadhyay, Carbon Constrained Electricity Sector Planning with Multiple Objectives, in Advances in Carbon Management Technologies, Volume 2 (ISBN: 9781003056157), Ed. S. K. Sikdar and F. Princiotta, CRC Press, Boca Raton, 347-364, 2021.
  4. S. Jain and S. Bandyopadhyay, Applications of Carbon Emission Pinch Analysis (CEPA) for Indian Electricity Sector, in Process Integration Approaches to Planning Carbon Management Networks (ISBN: 978-1-351-17088-8), Ed. D.C.Y. Foo and R.R. Tan, CRC Press, Boca Raton, 91-106, 2020.
  5. P. Sharan and S. Bandyopadhyay, Freshwater Production Using Multiple-Effect Evaporator, in Water Management: Social and Technological Perspectives (ISBN: 978-1-1380-6724-0), Ed. I.M. Mujtaba, T. Majozi, and M.K. Amosa, CRC Press, USA, 89-102, 2019.
  6. S. Bandyopadhyay and S. Narasimhan, Pinch Technology, in CRC Handbook of Thermal Engineering (ISBN: 978-1-4987-1527-0), Ed. R. P. Chhabra, CRC Press, Boca Raton, 875-896, 2018.
  7. L.K. Sahoo, S. Bandyopadhyay, and R. Banerjee, Benchmarking Energy Consumption of Truck Haulage, in Energy Efficiency in the Minerals Industry: Best Practices and Research Directions (ISBN: 978-3-319-54198-3), Ed. K. Awuah-Offei, Springer, Cham, 159-180, 2018.
  8. N.B. Desai and S. Bandyopadhyay, Bioenergy and Food Production: Appropriate Allocation for Future Development, in The Water-Food-Energy Nexus: Processes, Technologies, and Challenges (ISBN: 978-1-4987-6083-6), Ed. I.M. Mujtaba, R. Srinivasan, and N.O. Elbashir, CRC Press, USA, 221-233, 2017.
  9. N.B. Desai and S. Bandyopadhyay, Sustainability in Power Generation Systems, in Encyclopedia of Sustainable Technologies (ISBN: 978-0-128-04677-7), Ed. M. Abraham, Elsevier, USA, 157-163, 2017.
  10. S. K. Thengane, A. Hoadley, S. Bhattacharya, S. Mitra, and S. Bandyopadhyay, Applications of FAHP in analysing energy systems, in Fuzzy Analytic Hierarchy Process (ISBN: 978-1-498-73246-8), Ed. A. Emrouznejad and W. Ho, Taylor & Francis, Boca Raton, USA, 311-326, 2017.
  11. V. Andiappan, D.K.S. Ng, and S. Bandyopadhyay, Synthesis of Biomass-Based Tri-generation Systems with Variations in Biomass Supply and Energy Demand, in Process Design Strategies for Biomass Conversion Systems (ISBN: 978-1-118-69915-7), Eds. D.K.S. Ng, R.R. Tan, D.C.Y. Foo, and M.M. El-Halwagi, John Wiley & Sons, United Kingdom, 103-132, 2016.
  12. N.B. Desai and S. Bandyopadhyay, Biomass-fueled Organic Rankine Cycle based Cogeneration System, in Process Design Strategies for Biomass Conversion Systems (ISBN: 978-1-118-69915-7), Eds. D.K.S. Ng, R.R. Tan, D.C.Y. Foo, and M.M. El-Halwagi, John Wiley & Sons, United Kingdom, 247-261, 2016.
  13. N.D. Chaturvedi and S. Bandyopadhyay, Water Conservation in Fixed Scheduled Batch Processes, in Synthesis, Design, and Resource Optimization in Batch Chemical Plants (ISBN: 978-1-48225-241-5), Eds. T. Majozi, E.R. Seid, and J.Y. Lee, CRC Press, Boca Raton, USA, 337-360, 2015.
  14. S. Bandyopadhyay, Applications of Pinch Analysis in the Design of Isolated Energy Systems, in Handbook of Process Integration (PI) (ISBN: 978-0-85709-593-0), Eds. J. J. Klemes, Woodhead Pub. Ltd., Cambridge, UK, 1038-1056, 2013.
  15. S. Bandyopadhyay, A Novel Design Procedure for Solar Thermal System, in Recent Advances in Sustainable Process Design and Optimization (ISBN: 981-4271-95-0), Eds. D. C. Y. Foo, M. M. El-Halwagi, and R. R. Tan, World Scientific Pub. Co. Pte. Ltd., Singapore, 561-576, 2012.
  16. A. Roy and S. Bandyopadhyay, Design of an Optimal Standalone Wind Power Generation System, in Green Energy and Technology (ISBN: 978-1-60805-422-0; eISBN: 978-1-60805-285-1), Ed. H. Machrafi, Bentham Science Publishers, Oak Park, USA, 111-138, 2012.
  17. S. Bandyopadhyay, Solar Energy Storage: Technologies and Sizing, in A Solar Future for India (ISBN: 81-902925-2-8), Ed. G. M. Pillai, World Institute of Sustainable Energy, Pune, India, 81-99, 2011.



Journal Papers

  1. P. Sharma and S. Bandyopadhyay, A Quantitative Framework for Sustainability Assessment, Clean Technologies and Environmental Policy, 25, 2971–2985, 2023.
  2. S. Kamat, A. Gupta, and S. Bandyopadhyay, A Greedy Search Technique for Multiple Contaminant Water Network Synthesis, Process Integration and Optimization for Sustainability, 7, 931-940, 2023.
  3. S. Prabhakar and S. Bandyopadhyay, Optimum Integration of Negative Emission Technologies for Carbon-Constrained Energy Sector Planning, Journal of Cleaner Production, 411, # 137302, 2023.
  4. G. Waller, T. Crosbie, D. Newbury-Birch, S. Bandyopadhyay, D. A. Ghanem, A. Jana, G. G. Pillai, G. S. Krishna Priya, A. Sarkar, N. Thomas, P. Diba, and A. Divers, What is in a Meter? A Qualitative Exploration into the Implementation of Electricity Metering Across Mumbai Communities Using Normalisation Process Theory, Global Implementation Research and Applications, 2, 361-370, 2022.
  5. R. R. Tan, S. Bandyopadhyay, and D. C. Y. Foo, Use Pinch Analysis to Plan Peer-to-Peer Carbon Trading, Chemical Engineering Progress, 34-39, September, 2022.
  6. D. Arya and S. Bandyopadhyay, Uncertainties in the Resource Conservation Problems: A Review, Clean Technologies and Environmental Policy, 24, 2681–2699, 2022.
  7. S. Kamat, S. Bandyopadhyay, D. C. Y. Foo, and Z. Liao, State-of-the-Art Review of Heat Integrated Water Allocation Network Synthesis, Computers and Chemical Engineering, 167, #108003, 2022.
  8. S. Jain, H. H. Chin, S. Bandyopadhyay, and J. J. Klemeš, Clustering and Optimising Regional Segregated Resource Allocation Networks, Journal of Environmental Management, 322, # 116030, 2022.
  9. A. Roy and S. Bandyopadhyay, Economic Pinch Analysis for Estimating Service Life, Process Integration and Optimization for Sustainability, 6, 395–407, 2022.
  10. S. Kamat and S. Bandyopadhyay, Optimization of Regeneration Temperature for Energy Integrated Water Allocation Networks, Cleaner Engineering and Technology, 8, #100490, 2022.
  11. D. Arya and S. Bandyopadhyay, Stochastic Pinch Analysis to Address Multi-Objective Resources Conservation Problems with Parametric Uncertainties, Process Safety and Environmental Protection, 162, 30-48, 2022.
  12. D. Arya and S. Bandyopadhyay, Optimizing the Resource Cost in Multiple Resources Allocation Problem with Parametric Uncertainties, Chemical Engineering Research and Design, 178, 25-37, 2022.
  13. N. Thomas, A. Jana, and S. Bandyopadhyay, Physical Distancing on Public Transport in Mumbai, India: Policy and Planning Implications for Unlock and Post-pandemic Period, Transport Policy, 116, 217-236, 2022.
  14. R.R. Tan, K.B. Aviso, S. Bandyopadhyay, D.C.Y. Foo, and J.J. Klemeš, Circular Economy Meets the Drawdown Economy: Enhanced Weathering of Industrial Solid Waste as a Win-Win Solution, Resources, Conservation & Recycling, 178, #106029, 2022.
  15. N. Thomas, A. Jana, and S. Bandyopadhyay, Effect of Policies and COVID-19 Cases on Mobility and Activity Participation during 300 Days of COVID-19: Panel Data Analysis of Asian Countries, Journal of Eastern Asia Society for Transportation Studies, 14, 16-35, 2021.
  16. S. Jain, H. H. Chin, J. J. Klemeš, and S. Bandyopadhyay, Multi-Objective Pinch Analysis for Resource Conservation in Constrained Source-Sink Problems, Industrial & Engineering Chemistry Research, 60, 17596–17610, 2021.
  17. S. Kamat and S. Bandyopadhyay, Optimum Integration of Regeneration in Heat Integrated Water Networks through a Hybrid Approach, Process Integration and Optimization for Sustainability, 5, 707-727, 2021.
  18. H.H. Chin, P.S. Varbanov, J.J. Klemeš, S. Bandyopadhyay, Subsidised Water Symbiosis of Eco-Industrial Parks: A Multi-Stage Game Theory Approach, Computers and Chemical Engineering, 155, #107539, 2021.
  19. A. Jana, A. Sarkar, N. Thomas, Krishna Priya G.S., S. Bandyopadhyay, T. Crosbie, D. A. Ghanem, G. Waller, G. G. Pillai, D. Newbury-Birch, Rethinking Water Policy in India with the Scope of Metering towards Sustainable Water Future, Clean Technologies and Environmental Policy, 23, 2471-2495, 2021.
  20. S. Kamat and S. Bandyopadhyay, A Hybrid Approach for Heat Integration in Water Conservation Networks through Non-isothermal mixing, Energy, 233, #121143, 2021.
  21. S. Kamat and S. Bandyopadhyay, Bi-objective Pinch Analysis of Heat Integrated Water Conservation Networks, Journal of Cleaner Production, 312, #127676, 2021.
  22. R. R. Tan, K. B. Aviso, and S. Bandyopadhyay, Pinch-Based Planning of Terrestrial Carbon Management Networks, Cleaner Engineering and Technology, 4, #100141, 2021.
  23. S. Jain and S. Bandyopadhyay, Targeting Segregated Problems with Common Resources through Pinch Analysis, Journal of Cleaner Production, 301, #126996, 2021.
  24. M. Pyakurel, K. Nawandar, V. Ramadesigan, and S. Bandyopadhyay, Capacity Expansion of Power Plants Using Dynamic Energy Analysis, Clean Technologies and Environmental Policy, 23, 669-683, 2021.
  25. V. Kumar, S. Bandyopadhyay, K. Ramamritham, and A. Jana, Optimizing the redevelopment cost of urban areas to minimize the fire susceptibility of heterogeneous urban settings in developing nations: A case from Mumbai India, Process Integration and Optimization for Sustainability, 4, 361–378, 2020.
  26. V. Kumar, S. Bandyopadhyay, K. Ramamritham, and A. Jana, Pinch Analysis to Reduce Fire-Susceptibility by Redeveloping Urban Built Forms, Clean Technologies and Environmental Policy, 22, 1531-1546, 2020.
  27. S. Bandyopadhyay, Interval Pinch Analysis for Resource Conservation Networks with Epistemic Uncertainties, Industrial & Engineering Chemistry Research, 59, 13669–13681, 2020.
  28. I. B. Jadhav, M. Bose, and S. Bandyopadhyay, Optimization of Solar Thermal Systems with a Thermocline Storage Tank, Clean Technologies and Environmental Policy, 22, 1069-1084, 2020.
  29. S. Bandyopadhyay, Pinch Analysis for Economic Appraisal of Sustainable Projects, Process Integration and Optimization for Sustainability, 4, 171-182, 2020.
  30. S. Jain, S. Gupta, N. Thomas, and S. Bandyopadhyay, Capacity Expansion of Electricity Sector using Multiple Sustainability Indicators, Process Integration and Optimization for Sustainability, 4, 51-65, 2020.
  31. R. Tan, S. Bandyopadhyay, and D.C.Y. Foo, The Role of Process Integration in Managing Resource Constraints on Negative Emissions Technologies, Resources, Conservation & Recycling, 153, article-104540, 1-2, 2020.
  32. S. Thengane and S. Bandyopadhyay, Biochar Mines: Panacea to Climate Change and Energy Crisis?, Clean Technologies and Environmental Policy, 22, 5-10, 2020.
  33. N. Thomas, S. Bandyopadhyay and A. Jana, Investigating the Association of Individual and Neighborhood Characteristics with Travel time: Empirical Evidences from Mumbai, India, Journal of Eastern Asia Society for Transportation Studies, 13, 238-257, 2019.
  34. S. Kamat, P. Chokhani and S. Bandyopadhyay, Bi-Objective Optimization of Interplant Integration Using Pinch Analysis, Industrial & Engineering Chemistry Research, 58, 20014-20025, 2019.
  35. S. Kamat and S. Bandyopadhyay, Synthesis of Heat Integrated Water Allocation Networks Through Pinch Analysis, Process Integration and Optimization for Sustainability, 3, 515-531, 2019.
  36. D. Subramanian, S. Bandyopadhyay, and A. Jana, Optimization of financial expenditure to improve urban recreational open spaces using Pinch analysis: A case of three Indian cities, Process Integration and Optimization for Sustainability, 3, 273-284, 2019.
  37. D. Arya and S. Bandyopadhyay, Iterative Pinch Analysis to Address Non-linearity in a Stochastic Pinch Problem, Journal of Cleaner Production, 227, 543-553, 2019.
  38. S. Jain and S. Bandyopadhyay, Multi-objective Optimisation for Segregated Targeting Problems using Pinch Analysis, Journal of Cleaner Production, 221, 339-352, 2019.
  39. S. Thengane, R.R. Tan, D.C.Y. Foo, and S. Bandyopadhyay, A Pinch-Based Approach for Targeting of Carbon Capture, Utilization, and Storage (CCUS) Systems, Industrial & Engineering Chemistry Research, 58, 3188-3198, 2019.
  40. S. Kamat, S. Bandyopadhyay, G.C. Sahu, and D.C.Y. Foo, Optimal Synthesis of Heat Integrated Water Regeneration Network, Industrial & Engineering Chemistry Research, 58, 1310-1321, 2019.
  41. D. Arya, K. Shah, A. Gupta, and S. Bandyopadhyay, Stochastic Pinch Analysis to Optimize Resource Allocation Networks, Industrial & Engineering Chemistry Research, 57, 16423-16432, 2018.
  42. R. Tan, S. Bandyopadhyay, and D.C.Y. Foo, Graphical Pinch Analysis for Planning Biochar-Based Carbon Management Networks, Process Integration and Optimization for Sustainability, 2, 159-168, 2018.
  43. S. Jain and S. Bandyopadhyay, Cost optimal segregated targeting problems with dedicated sources, Process Integration and Optimization for Sustainability, 2, 143-158, 2018.
  44. S. K. Thengane, A. Hoadley, S. Bhattacharya, S. Mitra, and S. Bandyopadhyay, Thermodynamic evaluation of chemical looping based nitric oxide and hydrogen production, Chemical Engineering Research and Design, 132, 252-275, 2018.
  45. B. R. Nandi, S. Bandyopadhyay, and R. Banerjee, Numerical modeling and analysis of dual medium thermocline thermal energy storage, Journal of Energy Storage, 16, 218-230, 2018.
  46. P.S. Roychaudhuri and S. Bandyopadhyay, Financial Pinch Analysis: Minimum Opportunity Cost Targeting Algorithm, Journal of Environmental Management, 212, 88-98, 2018.
  47. S. Jain and S. Bandyopadhyay, Resource allocation network for segregated targeting problems with dedicated sources, Industrial & Engineering Chemistry Research, 56, 13831-13843, 2017.
  48. R. Basu, A. Jana, R. Bardhan, and S. Bandyopadhyay, Pinch Analysis as a quantitative decision framework for determining gaps in health care delivery systems, Process Integration and Optimization for Sustainability, 1, 213-223, 2017.
  49. P. Sharan and S. Bandyopadhyay, Optimal Temperature Selection for Energy Integrated Multiple-Effect Evaporator System, Process Integration and Optimization for Sustainability, 1, 189-202, 2017.
  50. M. Patole, S. Bandyopdhyay, D. C. Y. Foo, and R. R. Tan, Energy Sector Planning Using Multiple-Index Pinch Analysis, Clean Technologies and Environmental Policy, 19, 1967-1975, 2017.
  51. P.S. Roychaudhuri, V. Kazantzi, D.C.Y. Foo, R. R. Tan, and S. Bandyopadhyay, Selection of Energy Conservation Projects through Financial Pinch Analysis, Energy, 138, 602-615, 2017.
  52. P. Sharan and S. Bandyopadhyay, Energy Integration of Multiple-Effect evaporator, Thermo-Vapor Compressor, and Background Process, Journal of Cleaner Production, 164, 1192-1204, 2017.
  53. S. Norbu and S. Bandyopadhyay, Power Pinch Analysis for Optimal Sizing of Renewable-based Isolated System with Uncertainties, Energy, 135, 466-475, 2017.
  54. Krishna Priya G. S. and S. Bandyopadhyay, Multi-Objective Pinch Analysis for Power System Planning, Applied Energy, 202, 335-347, 2017.
  55. Krishna Priya G. S. and S. Bandyopadhyay, Multiple Objectives Pinch Analysis, Resources, Conservation & Recycling, 119, 128-141, 2017.
  56. D. K. Dheer, S. Doolla, S. Bandyopadhyay, J. M. Guerrero, Effect of Placement of Droop Based Generators in Distribution Network on Small Signal Stability Margin and Network Loss, International Journal of Electrical Power and Energy Systems, 88, 108-118, 2017.
  57. N. B. Desai and S. Bandyopadhyay, Line-focusing Concentrating Solar Collectors based Power Plants: A Review, Clean Technologies and Environmental Policy, 19, 9-35, 2017.
  58. P. Sharan and S. Bandyopadhyay, Solar Assisted Multiple-Effect Evaporator, Journal of Cleaner Production, 142, 2340-2351, 2017.
  59. S. Bandyopadhyay, D. C. Y. Foo, and R. R. Tan, Feeling the Pinch?, Chemical Engineering Progress, 46-49, November, 2016.
  60. P. Sharan and S. Bandyopadhyay, Integration of Thermo-Vapor Compressor with Multiple-Effect Evaporator, Applied Energy, 184, 560-573, 2016.
  61. S. Bandyopadhyay and N. B. Desai, Cost Optimal Energy Sector Planning: A Pinch Analysis Approach, Journal of Cleaner Production, 136, 246-253, 2016.
  62. S. K. Thengane, A. Hoadley, S. Bhattacharya, S. Mitra, and S. Bandyopadhyay, Exergy efficiency improvement in hydrogen production process by recovery of chemical energy versus thermal energy, Clean Technologies and Environmental Policy, 18, 1391-1404, 2016.
  63. N. B. Desai and S. Bandyopadhyay, Thermo-economic comparisons between solar steam Rankine and organic Rankine cycles, Applied Thermal Engineering, 105, 862-875, 2016.
  64. S. K. Thengane, S. Bandyopadhyay, S. Mitra, S. Bhattacharya, and A. Hoadley, An alternative process for nitric oxide and hydrogen production using metal oxides, Chemical Engineering Research and Design, 112, 36-45, 2016.
  65. P. Sharan and S. Bandyopadhyay, Energy Optimization in Parallel/Cross Feed Multiple-Effect Evaporator based Desalination System, Energy, 111, 756-767, 2016.
  66. M. S. Thakare, G. S. Krishna Priya, P. C. Ghosh, and S. Bandyopadhyay, Optimization of Photovoltaic-Thermal (PVT) based Cogeneration System through Water Replenishment Profile, Solar Energy, 133, 512-523, 2016.
  67. N. Chaturvedi, Z. A. Manan, S. R. Wan Alwi and S. Bandyopadhyay, Effect of multiple water resources in a flexible-schedule batch water network, Journal of Cleaner Production, 125, 245-252, 2016.
  68. P. Sharan and S. Bandyopadhyay, Energy Integration of Multiple Effect Evaporators with Background Process and Appropriate Temperature Selection, Industrial & Engineering Chemistry Research, 55(6), 1630-1641, 2016.
  69. N. B. Desai and S. Bandyopadhyay, Thermo-economic analysis and selection of working fluid for solar organic Rankine cycle, Applied Thermal Engineering, 95, 471-481, 2016.
  70. N. Chaturvedi, Z. A. Manan, S. R. Wan Alwi and S. Bandyopadhyay, Maximising Heat Recovery in Batch Processes via Product Streams Storage and Shifting, Journal of Cleaner Production, 112, 2802-2812, 2016.
  71. Krishna Priya G. S. and S. Bandyopadhyay, Optimum sizing of supply equipment for time varying demand, Computers & Chemical Engineering, 83, 72-78, 2015.
  72. J. K. Nayak, S. B. Kedare, R. Banerjee, S. Bandyopadhyay, N.B. Desai, S. Paul, and A. Kapila, 1MW National Solar Thermal Research cum Demonstration Facility, Current Science, 109(8), 1445-1457, 2015.
  73. S. Bandyopadhyay, Mathematical Foundation of Pinch Analysis, Chemical Engineering Transactions, 45, 1753-1758, 2015.
  74. R. R. Tan, S. Bandyopadhyay, D. C. Y. Foo, and D. K. S. Ng, Prospects for Novel Pinch Analysis Application Domains in the 21st Century, Chemical Engineering Transactions, 45, 1741-1746, 2015.
  75. N. B. Desai and S. Bandyopadhyay, Integration of parabolic trough and linear Fresnel collectors for optimum design of concentrating solar thermal power plant, Clean Technologies and Environmental Policy, 17, 1945-1961, 2015.
  76. B. Rajpathak, H. K. Pillai, and S. Bandyopadhyay, Analysis of Unstable Periodic Orbits and Chaotic Orbits in the 1-D Linear Piecewise-smooth Discontinuous Map, Chaos: An Interdisciplinary Journal of Nonlinear Science, 25(10), 103101, 2015.
  77. N. Chaturvedi and S. Bandyopadhyay, Targeting Aggregate Production Planning for Energy Supply Chain, Industrial & Engineering Chemistry Research, 54(27), 6941-6949, 2015.
  78. M. H. Bade and S. Bandyopadhyay, Analysis of Gas Turbine Integrated Cogeneration Plant: Process Integration Approach, Applied Thermal Engineering, 78, 118-128, 2015.
  79. N. B. Desai and S. Bandyopadhyay, Optimization of concentrating solar thermal power plant based on parabolic trough collector, Journal of Cleaner Production, 89, 262-271, 2015.
  80. S. Bandyopadhyay, N. Chaturvedi, and A. Desai, Targeting Compression Work for Hydrogen Allocation Networks, Industrial & Engineering Chemistry Research, 53(48), 18539-18548, 2014.
  81. V. Andiappan, D. K. S. Ng, and S. Bandyopadhyay, Synthesis of biomass-based trigeneration systems with uncertainties, Industrial & Engineering Chemistry Research, 53(46), 18016-18028, 2014.
  82. L. Sahoo, S. Bandyopadhyay, and R. Banerjee, Water and energy assessment for dewatering in opencast mines, Journal of Cleaner Production, 84, 736-745, 2014.
  83. G. C. Sahu, S. Bandyopadhyay, D. C. Y. Foo, D. K. S. Ng, and R. R. Tan, Targeting for Optimal Grid-Wide Deployment of Carbon Capture and Storage (CCS) Technology, Process Safety and Environmental Protection, 92(6), 835-848, 2014.
  84. M. H. Bade and S. Bandyopadhyay, Minimization of Thermal Oil Flow Rate for Indirect Integration of Multiple Plants, Industrial & Engineering Chemistry Research, 53(33), 13146-13156, 2014.
  85. S. K. Thengane, A. Hoadley, S. Bhattacharya, S. Mitra, and S. Bandyopadhyay, Cost-benefit Analysis of Different Hydrogen Production Technologies using AHP and Fuzzy AHP, International Journal of Hydrogen Energy, 39(28), 15293-15306, 2014.
  86. Krishna Priya G. S., R. R. Tan, and S. Bandyopadhyay, Power System Planning with Emission Constraints: Effects of CCS Retrofitting, Process Safety and Environmental Protection, 92(5), 447-455, 2014.
  87. N. B. Desai, S. B. Kedare, and S. Bandyopadhyay, Optimization of Design Radiation for Concentrating Solar Thermal Power Plants without Storage, Solar Energy, 107, 98-112, 2014.
  88. N. Chaturvedi and S. Bandyopadhyay, Simultaneously targeting for the minimum water requirement and the maximum production in a batch process, Journal of Cleaner Production, 77, 105-115, 2014.
  89. A. Roy, S. B. Kedare, and S. Bandyopadhyay, Design and optimization of isolated wind-battery systems incorporating multiple wind generators, Wind Engineering, 38(3), 311-336, 2014.
  90. N. Chaturvedi and S. Bandyopadhyay, Optimization of multiple fresh water resources in flexible schedule batch water network, Industrial & Engineering Chemistry Research, 53(14), 5996-6005, 2014.
  91. J. A. R. Diamante, R. R. Tan, D. C. Y. Foo, D. K. S. Ng, K. B. Aviso, and S. Bandyopadhyay, Unified Pinch Approach for Targeting of Carbon Capture and Storage (CCS) Systems with Multiple Time Periods and Regions, Journal of Cleaner Production, 71, 67-74, 2014.
  92. A. Chandrayan and S. Bandyopadhyay, Cost Optimal Segregated Targeting for Resource Allocation Networks, Clean Technologies and Environmental Policy, 16(3), 455-465, 2014.
  93. Sreeraj E. S., E. K. Prejith, K. Chatterjee, and S. Bandyopadhyay, An Active Harmonic Filter based on One Cycle Control, IEEE Transactions on Industrial Electronics, 61(8), 3799-3809, 2014.
  94. M. H. Bade and S. Bandyopadhyay, Thermal Integration of Heat Transfer Fluid Systems, Asia-Pacific Journal of Chemical Engineering, 9, 1-15, 2014.
  95. L. Sahoo, S. Bandyopadhyay, and R. Banerjee, Benchmarking energy consumption for dump trucks in mines, Applied Energy, 113, 1382-1396, 2014.
  96. N. Chaturvedi and S. Bandyopadhyay, Indirect Thermal Integration for Batch Processes, Applied Thermal Engineering, 62, 229-238, 2014.
  97. N. Chaturvedi and S. Bandyopadhyay, Targeting for Multiple Resources in Batch Processes, Chemical Engineering Science, 104, 1081-1089, 2013.
  98. G. S. Krishna Priya and S. Bandyopadhyay, Emission Constrained Power System Planning: A Pinch Analysis Based Study of Indian Electricity Sector, Clean Technologies and Environmental Policy, 15, 771-782, 2013.
  99. G. S. Krishna Priya, M. S. Thakare, P. C. Ghosh, and S. Bandyopadhyay, Sizing of Standalone Photovoltaic Thermal (PVT) Systems Using Design Space Approach, Solar Energy, 97, 48-57, 2013.
  100. O. Adekola, J. D. Stamp, T. Majozi, A. Garg, and S. Bandyopadhyay, A Unified Approach for the Optimisation of Energy and Water in Multipurpose Batch Plants Using a Flexible Scheduling Framework, Industrial & Engineering Chemistry Research, 52 (25), 8488-8506, 2013.
  101. J. A. R. Diamante, R. R. Tan, D. C. Y. Foo, D. K. S. Ng, K. B. Aviso, and S. Bandyopadhyay, A Graphical Approach to Pinch-Based Source-Sink Matching and Sensitivity Analysis in Carbon Capture and Storage System, Industrial & Engineering Chemistry Research, 52 (22), 7211-7222, 2013.
  102. B. Rajpathak, H. K. Pillai, and S. Bandyopadhyay, Analysis of 1-D Linear Piecewise-smooth Discontinuous Map, Chaotic Modeling and Simulation, 2, 257-264, 2013.
  103. G. C. Sahu, A. Garg, T. Majozi, and S. Bandyopadhyay, Optimum Design of Waste Water Treatment Network, Industrial & Engineering Chemistry Research, 52 (14), 5161-5171, 2013.
  104. R. R. Tan, K. B. Aviso, S. Bandyopadhyay, and D. K. S. Ng, Optimal Source-Sink Matching in Carbon Capture and Storage Systems with Time, Injection Rate and Capacity Constraints, Environmental Progress & Sustainable Energy, 32 (2), 411-416, 2013.
  105. Sreeraj E. S., K. Chatterjee, and S. Bandyopadhyay, One Cycle Controlled Single-Stage, Single-Phase Voltage Sensor-less Grid-Connected PV System, IEEE Transactions on Industrial Electronics, 60, 1216-1224, 2013.
  106. S. Dhakhwa, S. Bandyopadhyay, T. Majozi, and A. Garg, Efficacy of Chemical Oxidation and Coagulation for COD and Color Reduction from Pulp Mill Effluent, Journal of Environmental Engineering, 138, 1194-1199, 2012.
  107. B. Rajpathak, H. K. Pillai, and S. Bandyopadhyay, Analysis of Stable Periodic Orbits in the 1-D Linear Piecewise-smooth Discontinuous Map, Chaos: An Interdisciplinary Journal of Nonlinear Science, 22(3), 033126, 2012.
  108. R. R. Tan, K. B. Aviso, S. Bandyopadhyay, and D. K. S. Ng, A Continuous-Time Optimization Model for Source-Sink Matching in Carbon Capture and Storage Systems, Industrial & Engineering Chemistry Research, 51(30), 10015-10020, 2012.
  109. N. Chaturvedi and S. Bandyopadhyay, A Rigorous Targeting to Minimize Resource Requirement in Batch Processes, Industrial & Engineering Chemistry Research, 51(23), 8015-8024, 2012.
  110. J. Varghese and S. Bandyopadhyay, Fired Heater Integration into Total Site and Multiple Fired Heater Targeting, Applied Thermal Engineering, 42, 111-118, 2012.
  111. G. C. Sahu and S. Bandyopadhyay, Mathematically Rigorous Algebraic and Graphical Techniques for Targeting Minimum Resource Requirement and Inter-plant flow rate for Total Site Involving Two Plants, Industrial & Engineering Chemistry Research, 51(8), 3401-3417, 2012.
  112. J. Varghese and S. Bandyopadhyay, Improved Area- Energy Targeting for Fired Heater Integrated Heat Exchanger Networks, Chemical Engineering Research & Design, 90, 213-219, 2012.
  113. G. C. Sahu and S. Bandyopadhyay, Energy Optimization in Heat Integrated Water Allocation Networks, Chemical Engineering Science, 69(1), 352-364, 2012.
  114. G. C. Sahu and S. Bandyopadhyay, Minimization of Resource Requirement and Inter-Plant Cross Flow Across Resource Allocation Networks, Chemical Engineering Transactions, 25, 279-284, 2011.
  115. A. Roy, S. B. Kedare, and S. Bandyopadhyay, Physical Design Space for Isolated Wind-battery System Incorporating Resource Uncertainty, Proc. IMechE, Part A: Journal of Power and Energy, 225(4), 421-442, 2011.
  116. A. Roy, S. B. Kedare, and S. Bandyopadhyay, On the Existence of Non-convexities in the Design Space of Isolated Wind-Battery Systems, Wind Engineering, 35(2), 221-244, 2011.
  117. S. Dhakhwa, S. Bandyopadhyay, and A. Garg, Removal of Color and COD from Synthetic Paper Mill Effluent Using Coagulation/Acid Precipitation Process, IPPTA Journal, 23(2), 187-191, 2011.
  118. G. C. Sahu and S. Bandyopadhyay, Energy Integration Across Multiple Water Allocation Networks with Negligible Contaminant Effects, Asia-Pacific Journal of Chemical Engineering, 6(3), 527-536, 2011.
  119. S. Bandyopadhyay, Design and Optimization of Isolated Energy Systems through Pinch Analysis, Asia-Pacific Journal of Chemical Engineering, 6(3), 518-526, 2011.
  120. R.N. Patel, S. Bandyopadhyay and A. Ganesh, Extraction of Cardanol and Phenol from Bio Oils Obtained through Vacuum Pyrolysis of Biomass using Supercritical Fluid Extraction, Energy, 36(3), 1535-1542, 2011.
  121. U. V. Shenoy, S. Bandyopadhyay and G. C. Sahu, Reply to the letter titled 'Incorporation of targeting insights into network design stage' by D.C.Y. Foo (AIChE Journal Manuscript ID: AIChE-09-12544), AIChE Journal, 57(4), 1096-1098, 2011.
  122. J. George, G. C. Sahu, and S. Bandyopadhyay, Heat Integration in Process Water Networks, Industrial & Engineering Chemistry Research, 50(7), 3695-3704, 2011.
  123. R.N. Patel, S. Bandyopadhyay and A. Ganesh, A Simple Model for Super Critical Fluid Extraction of Bio Oils from Biomass, Energy Conversion & Management, 52(1), 652-657, 2011.
  124. Arun P., R. Banerjee, and S. Bandyopadhyay, Optimum Design of Diesel Generator Integrated Photovoltaic-Battery System, Energy & Fuels, 24 (12), 6565-6575, 2010.
  125. S. Bandyopadhyay and G. C. Sahu, Modified Problem Table Algorithm for Energy Targeting, Industrial & Engineering Chemistry Research, 49(22), 11557-11563, 2010.
  126. G. C. Sahu and S. Bandyopadhyay, Energy Conservation in Water Allocation Networks with Negligible Contaminant Effects, Chemical Engineering Science, 65(14), 4182-4193, 2010.
  127. A. Roy, S. B. Kedare, and S. Bandyopadhyay, Optimum Sizing of Wind-Battery Systems Incorporating Resource Uncertainty, Applied Energy, 87(8), 2712-2727, 2010.
  128. Sreeraj E. S., K. Chatterjee, and S. Bandyopadhyay, Design of Isolated Renewable Hybrid Power Systems, Solar Energy, 84(7), 1124-36, 2010.
  129. Bandyopadhyay S., G. C. Sahu, D. C. Y. Foo, and R. R. Tan, Segregated Targeting for Multiple Resources Using Decomposition Principle, AIChE Journal, 56(5), 1235-1248, 2010.
  130. S. Bandyopadhyay, J. Varghese, and V. Bansal, Targeting for Cogeneration Potential through Total Site Integration, Applied Thermal Engineering, 30(1), 6-14, 2010.
  131. A. Roy, S. B. Kedare, and S. Bandyopadhyay, Design of Wind Power Generation Systems for Industrial Application Incorporating Resource Uncertainty, Chemical Engineering Transactions, 18, 647-652, 2009.
  132. A.K. Das, U.V. Shenoy, and S. Bandyopadhyay, Evolution of Resource Allocation Networks, Industrial & Engineering Chemistry Research, 48(15), 7152-7167, 2009.
  133. S. Bandyopadhyay, Targeting Minimum Waste Treatment Flow Rate, Chemical Engineering Journal, 152(2-3), 367-375, 2009.
  134. A. Roy, S. B. Kedare, and S. Bandyopadhyay, Application of Design Space Methodology for Optimum Sizing of Wind-Battery Systems, Applied Energy, 86(12), 2690-2703, 2009.
  135. Desai N.B., and S. Bandyopadhyay, Process Integration of Organic Rankine Cycle, Energy, 34(10), 1674-1686, 2009.
  136. Arun P., R. Banerjee, and S. Bandyopadhyay, Optimum Sizing of Photovoltaic Battery Systems Incorporating Uncertainty through Design Space Approach, Solar Energy, 83(7), 1013-1025, 2009.
  137. Arun P., R. Banerjee, and S. Bandyopadhyay, Optimum Design of Battery Integrated Diesel Generator Systems Incorporating Demand Uncertainty, Industrial & Engineering Chemistry Research, 48(10), 4908-4916, 2009.
  138. J. Varghese and S. Bandyopadhyay, Energy Integration of Fired Heaters into Overall Processes, International Journal of Environment and Sustainable Development, 8(1), 36-59, 2009.
  139. G. N. Kulkarni, S. B. Kedare, and S. Bandyopadhyay, Optimization of Solar Water Heating Systems through Water Replenishment, Energy Conversion & Management, 50, 837-846, 2009.
  140. G. N. Kulkarni, S. B. Kedare, and S. Bandyopadhyay, Design of Solar Thermal Systems Utilizing Pressurized Hot Water Storage for Industrial Applications, Solar Energy, 82, 686-699, 2008.
  141. Arun P., R. Banerjee, and S. Bandyopadhyay, Optimum Sizing of Battery Integrated Diesel Generator for Remote Electrification through Design-Space Approach, Energy, 33, 1155-1168, 2008.
  142. S. Bandyopadhyay and C. C. Cormos, Water Management in Process Industries Incorporating Regeneration and Recycle through Single Treatment Unit, Industrial & Engineering Chemistry Research, 47(4), 1111-1119, 2008.
  143. A. Roy, Arun P., and S. Bandyopadhyay, Design and Optimization of Renewable Energy Based Isolated Power Systems, SESI Journal, 17(1-2), 54-69, 2007.
  144. Arun P., R. Banerjee, and S. Bandyopadhyay, Sizing Curve for Design of Isolated Power Systems, Energy for Sustainable Development, 11(4), 21-28, 2007.
  145. H.K. Pillai and S. Bandyopadhyay, A Rigorous Targeting Algorithm for Resource Allocation Networks, Chemical Engineering Science, 62, 6212-6221, 2007.
  146. J. Varghese and S. Bandyopadhyay, Targeting for Energy Integration of Multiple Fired Heaters, Industrial & Engineering Chemistry Research, 46(17), 5631-5644, 2007.
  147. G. N. Kulkarni, S. B. Kedare, and S. Bandyopadhyay, Determination of Design Space and Optimization of Solar Water Heating Systems, Solar Energy, 81(8), 958-968, 2007.
  148. U. V. Shenoy and S. Bandyopadhyay, Targeting for Multiple Resources, Industrial & Engineering Chemistry Research, 46(11), 3698-3708, 2007.
  149. S. Bandyopadhyay, Thermal Integration of a Distillation Column through Side-exchangers, Transaction IChemE: Chemical Engineering Research & Design, 85(1), 155-166, 2007.
  150. S. Bandyopadhyay, Source Composite Curve for Waste Reduction, Chemical Engineering Journal, 125(2), 99-110, 2006.
  151. R.N. Patel, S. Bandyopadhyay and A. Ganesh, Economic Appraisal of Supercritical Fluid Extraction of Refined Cashew Nut Shell Liquid, Journal of Chromatography A, 1124(1-2), 130-138, 2006.
  152. S. Bandyopadhyay, M.D. Ghanekar and H.K. Pillai, Process Water Management, Industrial & Engineering Chemistry Research, 45(15), 5287-5297, 2006.
  153. R.N. Patel, S. Bandyopadhyay and A. Ganesh, Extraction of Cashew (Anacardium Occidentale) Nut Shell Liquid Using Supercritical Carbon Dioxide, Bioresource Technology, 97(6), 847-853, 2006.
  154. A. Bhakta and S. Bandyopadhyay, Constructal Optimization of Top Contact Metallization of A Photovoltaic Solar Cell, International Journal of Thermodynamics, 8(4), 175-181, 2005.
  155. S. Bandyopadhyay, M. Mishra, and U. V. Shenoy, Energy-Based Targets For Multiple-Feed Distillation Columns, AIChE Journal, 50(8), 1837-1853, 2004.
  156. S. Bandyopadhyay, Thermo-economic Analysis of Regenerative Heat Engines, Indian Journal of Pure & Applied Physics, 42(1), 31-37, 2004.
  157. S. Bandyopadhyay, R. K. Malik, and U. V. Shenoy, Feed Preconditioning Targets for Distillation through Invariant Rectifying - Stripping Curves, Industrial & Engineering Chemistry Research, 42(26), 6851-6861, 2003.
  158. S. Bandyopadhyay, Effect of Feed on Optimal Thermodynamic Performance of a Distillation Column, Chemical Engineering Journal, 88(1-3), 175-186, 2002.
  159. S. Bandyopadhyay and N. C. Bera, Parametric Representation of Carnot-Like Heat Engines in Finite Time, Journal of Energy Heat & Mass Transfer, 23(1), 55-61, 2001.
  160. S. Bandyopadhyay, N. C. Bera and S. Bhattacharyya, Thermoeconomic Optimization of Combined Cycle Power Plants, Energy Conversion & Management, 42(3), 359-371, 2001.
  161. S. Bandyopadhyay, R. K. Malik, and U. V. Shenoy, Invariant Rectifying-Stripping Curves for Targeting Minimum Energy and Feed Location in Distillation, Computers & Chemical Engineering, 23(8), 1109-1124, 1999.
  162. S. Bandyopadhyay, R. K. Malik, and U. V. Shenoy, Temperature-Enthalpy Curve for Energy Targeting of Distillation Columns, Computers & Chemical Engineering, 22(12), 1733-1744, 1998.
  163. N. C. Bera and S. Bandyopadhyay, Effect of Combustion on the Economic Operation of Endoreversible Otto and Joule-Brayton Engine, International Journal of Energy Research, 22(3), 249-256, 1998.
  164. U. V. Shenoy, A. Sinha, and S. Bandyopadhyay, Multiple Utilities Targeting for Heat Exchanger Networks, Transaction IChemE: Chemical Engineering Research & Design, 76(3), 259-272, 1998.



Editorial, Review Articles in Journals

  1. A. Sharma, G.S. Krishna Priya and S. Bandyopadhyay, Industrial decarbonization: A revolution ahead (Editorial), Clean Technologies and Environmental Policy, 25(8), 2023.
  2. S. Seethamraju and S. Bandyopadhyay, Hydrogen economy: hope or hype? (Editorial), Clean Technologies and Environmental Policy, 25(3), 2023.
  3. S. Bandyopadhyay, D.C.Y. Foo, and R.R. Tan, Creativity in Process Integration Research, 2022 Best Paper, and an Elegy (Editorial), Process Integration and Optimization for Sustainability, 7, 2023.
  4. S. Bandyopadhyay, D.C.Y. Foo, and R.R. Tan, Sustainability Trends, 2021 Best Paper, and Plans for 2022 (Editorial), Process Integration and Optimization for Sustainability, 6, 2022.
  5. S. Bandyopadhyay, All forms of energy are equal, but some forms of energy are more equal than others (Editorial), Clean Technologies and Environmental Policy, 23(10), 2021.
  6. S.S. Kachhwaha, N.B. Desai, and S. Bandyopadhyay, Thermal engineering for sustainable technologies (Editorial), Clean Technologies and Environmental Policy, 23(4), 2021.
  7. S. Bandyopadhyay, D.C.Y. Foo, and R.R. Tan, Milestones and Best Papers 2017–2020 (Editorial), Process Integration and Optimization for Sustainability, 1, 2021.
  8. S. Bandyopadhyay, Public transport during pandemic (Editorial), Clean Technologies and Environmental Policy, 22(9), 2020.
  9. S. Bandyopadhyay, Coronavirus Disease 2019 (COVID‑19): we shall overcome (Editorial), Clean Technologies and Environmental Policy, 22(3), 2020.
  10. S. Bandyopadhyay, Let us 'bring back the forest' (Editorial), Clean Technologies and Environmental Policy, 21(7), 2019.
  11. S. Bandyopadhyay, The First Step Towards Energy Revolution (Editorial), Clean Technologies and Environmental Policy, 21(2), 2019.
  12. S. Bandyopadhyay, Renewable Electricity: A Hope for the Future (Editorial), Clean Technologies and Environmental Policy, 20(2), 2018.
  13. S. Bandyopadhyay, Evaluating Sustainable Economic Development (Editorial), Clean Technologies and Environmental Policy, 19(7), 2017.
  14. S. Bandyopadhyay, D.C.Y. Foo and R.R. Tan, Pursuing Sustainability with Process Integration and Optimization (Editorial), Process Integration and Optimization for Sustainability, 1, 2017.
  15. S. Bandyopadhyay, Renewable Targets for India (Editorial), Clean Technologies and Environmental Policy, 19(2), 2017.
  16. S. Bandyopadhyay, C.A. Babu, and J. Varghese, Editorial for the special issue on Energy Efficient and Environment Friendly Technologies for the Future, International Journal of Energy Technology and Policy, 13(1/2), 2017.
  17. S. Bandyopadhyay, D.C.Y. Foo and R.R. Tan, Editorial for the special issue on Process Integration for Sustainable Resource and Waste Management, Process Safety and Environmental Protection, 103, 2016.
  18. P.C. Ghosh and S. Bandyopadhyay, Editorial for the special issue on Energy Conversion and Management, International Journal of Energy Technology and Policy, 12(2), 2016.
  19. S. Bandyopadhyay, Sunny days are ahead, but not without challenges (Editorial), Clean Technologies and Environmental Policy, 18(4), 2016.
  20. S. Bandyopadhyay, Careful with your energy efficiency program! It may 'rebound'! (Editorial), Clean Technologies and Environmental Policy, 17(6), 2015.
  21. S. Bandyopadhyay, To save the sun for a rainy day and to save the rain for a sunny day (Editorial), Clean Technologies and Environmental Policy, 17(1), 2015.
  22. S. Bandyopadhyay, The answer is not blowin' in the wind, or is it? (Editorial), Clean Technologies and Environmental Policy, 16(2), 2014.
  23. S. Bandyopadhyay and P. Rajesh Kanna, Editorial for the special issue on Energy Management and Resources: Part Two, International Journal of Energy Technology and Policy, 8(1), 2012.
  24. P. Rajesh Kanna and S. Bandyopadhyay, Editorial for the special issue on Energy Management and Resources: Part One, International Journal of Energy Technology and Policy, 7(5/6), 2011.
  25. S. Bandyopadhyay, Book Review: Handbook of Water and Energy Management in Food Processing, J. Klemes, R. Smith and J.-K. Kim (Editors), Woodhead Publishing Limited (2008), Journal of Cleaner Production, 7(10), 969, 2009.



Conference Papers

  1. R. Gundre, G.S. Krishna Priya, S. Bandyopadhyay, and S. Seethamraju, Carbon abatement scenarios for Indian cement sector, Presented at The Energy Summit 2023, Chennai, India, December 5-8, 2023.
  2. V. Tiwari, A. Jana, and S. Bandyopadhyay, Choice of Cooking and Lighting Energy Source in Households: Empirical Evidence from Urban India, Presented at Energise 2023: Lifestyle, Energy Efficiency, and Climate Action, Goa, India, November 1-4, 2023.
  3. A. Sharma, S. Seethamraju, and S. Bandyopadhyay, Critical Insights into Indian Aluminium Industries: Carbon Scenarios, Decarbonization measures, and Economic Perspectives, Presented at International Conference on Technology and Innovations for Sustainable Development (TISD-2023), Prayagraj, India, October 27-29, 2023.
  4. S. Prabhakar and S. Bandyopadhyay, Graphical Optimisation of Supplying Water and Energy in a Water-Energy Nexus System, Proceedings of the 26th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2023), Thessaloniki, Greece, October 8-11, 2023.
  5. N. Bhardwaj, S. Seethamraju, S. Bandyopadhyay, and R. Banerjee, Decarbonisation Options for Rotary Kiln-Induction Furnace Process of Crude Steel Production, Proceedings of the 26th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2023), Thessaloniki, Greece, October 8-11, 2023.
  6. A.K. Pandey and S. Bandyopadhyay, Incorporation of Epistemic Uncertainties in Resource Conservation Networks with Multiple Resources, Proceedings of the 26th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2023), Thessaloniki, Greece, October 8-11, 2023.
  7. R.K. Yadav, S. Bandyopadhyay, and A.F.A. Hoadley, Design of Solar Thermal Hot Water System for Industrial Processes, Proceedings of the 26th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2023), Thessaloniki, Greece, October 8-11, 2023.
  8. R.R. Tan, S. Bandyopadhyay, D.C.Y. Foo, M.V. Migo-Sumagang, and K.B. Aviso, Pinch Analysis for Temporally Constrained Carbon Trading, Proceedings of the 26th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2023), Thessaloniki, Greece, October 8-11, 2023.
  9. M.U. Ashna and S. Bandyopadhyay, Pinch Analysis-Based Targeting Multiple Resources in Water Conservation Networks, Proceedings of the 26th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2023), Thessaloniki, Greece, October 8-11, 2023.
  10. N. Thomas, S. Bandyopadhyay, and A. Jana, Evaluating the Activity-Based Transport Emission through Transport Modal Split Optimization Model based on Travel Behavior, paper presented in the 10th Asian Symposium on Process Systems Engineering (PSE Asia 2022), Chennai, India, December 10-14, 2022.
  11. P. Sharma and S. Bandyopadhyay, A Framework for Sustainability Assessment of Negative Emission Technologies, paper presented in the 10th Asian Symposium on Process Systems Engineering (PSE Asia 2022), Chennai, India, December 10-14, 2022.
  12. S. Prabhakar and S. Bandyopadhyay, Cost Optimal Electricity Sector Planning of Island Regions, paper presented in the 10th Asian Symposium on Process Systems Engineering (PSE Asia 2022), Chennai, India, December 10-14, 2022.
  13. N. Thomas, S. Bandyopadhyay, and A. Jana, Transport Modal Split Optimization Model based on Travel Behavior: Impact of Activity-Specific Policies on Transport Energy and Emission, paper presented online in the 6th Sustainable Process Integration Laboratory (SPIL) Scientific Conference, Brno, Czech Republic, November 14-15, 2022.
  14. S. Prabhakar and S. Bandyopadhyay, Integration of Negative Emission Technologies for Carbon-Constrained Energy Planning, paper presented online in the 6th Sustainable Process Integration Laboratory (SPIL) Scientific Conference, Brno, Czech Republic, November 14-15, 2022.
  15. P. Sharma and S. Bandyopadhyay, Sustainability Assessment Framework Incorporating Interval Parameters, Proceedings of the 25th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2022), Split, Croatia, September 5-8, 2022.
  16. S. Jain, S. Bandyopadhyay, P. S. Varbanov and J. J. Klemeš, Pinch Analysis Approach for Segregated Targeting Networks with Forbidden Matches, Proceedings of the 25th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2022), Split, Croatia, September 5-8, 2022.
  17. N. Thomas, A. Jana and S. Bandyopadhyay, Evaluating the effect of behavioural change policies on transport energy through transport mode split optimization model: A case study of Mumbai, India, paper presented in the Energy and Climate Transformations: 3rd International Conference on Energy Research & Social Science, Manchester, United Kingdom, June 20-23, 2022.
  18. S. Jain, H. H. Chin, S. Bandyopadhyay and J. J. Klemeš, P-graph approach for multi-index segregated resource conservation network, Proceedings of the International Conference on Cleaner Production and Sustainability (CPS 2021), Manila, Philippines, December 12-13, 2021.
  19. S. Kamat and S. Bandyopadhyay, Optimization of Heat Integration in Water Networks with variable regeneration temperatures, paper presented online in the 5th SPIL International Scientific Conference: Energy, Water, Emission & Waste in Industry and Cities (SPIL 2021), Brno, Czech Republic, November 4-5, 2021.
  20. R. R. Tan, S. Bandyopadhyay and D. C. Y. Foo, Graphical Method for Optimizing Peer-to-Peer Carbon Trading, paper presented online in the 5th SPIL International Scientific Conference: Energy, Water, Emission & Waste in Industry and Cities (SPIL 2021), Brno, Czech Republic, November 4-5, 2021.
  21. A. Ray, N. Kazantzis, D. C. Y. Foo, V. Kazantzi, R. R. Tan and S. Bandyopadhyay, Financial Pinch Analysis for Selection of Energy Conservation Projects with Uncertainties, Proceedings of the 24th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2021), pp. 109-114, Brno, Czech Republic, October 31-November 3, 2021.
  22. S. Jain, H. H. Chin, J. J. Klemeš and S. Bandyopadhyay, Optimising Segregated Resource Conservation Network with Cross-Zonal Transfer for Multiple Resources and Qualities, Proceedings of the 24th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2021), pp. 103-108, Brno, Czech Republic, October 31-November 3, 2021.
  23. N. Thomas, A. Jana and S. Bandyopadhyay, Effect of Policies and COVID-19 Cases on Mobility and Activity Participation during 300 Days of COVID-19: Panel Data Analysis of Asian Countries, paper presented in the 14th International Conference of the Eastern Asia Society for Transportation Studies (EASTS), Hiroshima, Japan Lanka, September 12-14, 2021.
  24. Krishna Priya G.S., G. G. Pillai, A. Jana, S. Bandyopadhyay, T. Crosbie, D. A. Ghanem, An Analytic Hierarchy Process (AHP) Framework for Feature Evaluation of Smart Electricity Meters in India, paper presented in the 56th International Universities Power Engineering Conference (UPEC), Teesside University, UK, August 31-September 3, 2021.
  25. S. Kamat and S. Bandyopadhyay, Heat Integration in Water Allocation Networks through Grand Composite Curves, paper presented online in the 4th SPIL International Scientific Conference: Energy, Water, Emission & Waste in Industry and Cities (SPIL 2020), Brno, Czech Republic, November 18-20, 2020.
  26. S. Jain and S. Bandyopadhyay, Progress review of Segregated Targeting Problems, paper presented online in the 4th SPIL International Scientific Conference: Energy, Water, Emission & Waste in Industry and Cities (SPIL 2020), Brno, Czech Republic, November 18-20, 2020.
  27. S. Kamat and S. Bandyopadhyay, Synthesis of Heat Integrated Water Regeneration Network with Optimum Process/Regeneration Temperatures, paper presented online in the 9th Asian Symposium on Process Systems Engineering (PSE Asia 2020), Taipei, Taiwan, November 4-6, 2020.
  28. S. Jain and S. Bandyopadhyay, Pinch Analysis approach for multi-objective segregated targeting problems with common resources, paper presented online in the 9th Asian Symposium on Process Systems Engineering (PSE Asia 2020), Taipei, Taiwan, November 4-6, 2020.
  29. N. Thomas, A. Jana and S. Bandyopadhyay, Do socioeconomic characteristics affect the travel time and transport perception? Insights from Mumbai, India, paper presented in the International Conference on Urban Science and Engineering, Mumbai, India, February 28-29, 2020.
  30. N. Thomas, A. Jana and S. Bandyopadhyay, Multimodal Transportation in Mumbai: Assessing the User Behaviour, paper presented in the International Conference on Urban Science and Engineering, Mumbai, India, February 28-29, 2020.
  31. N. Thomas, C. Vadher, S. Bandyopadhyay and A. Jana, Is electric vehicles a sustainable solution to the Indian transport system? A case study from Mumbai, India, paper presented in the International Conference on Energy and Sustainable Development, Kolkata, India, February 14-15, 2020.
  32. S. Kamat and S. Bandyopadhyay, Bi-objective optimization in heat integrated water allocation networks, paper presented in the International Conference on Energy and Sustainable Development, Kolkata, India, February 14-15, 2020.
  33. S. Jain and S. Bandyopadhyay, Cost optimization of segregated targeting problems with common resources using Pinch Analysis, paper presented in the International Conference on Energy and Sustainable Development, Kolkata, India, February 14-15, 2020.
  34. N. Thomas, S. Bandyopadhyay and A. Jana, Investigating the Association of Individual and Neighborhood Characteristics with Travel time: Empirical Evidences from Mumbai, India, paper presented in the 13th International Conference of the Eastern Asia Society for Transportation Studies (EASTS), Colombo, Sri Lanka, September 9-12, 2019.
  35. M.P. Bonkile, V. Ramadesigan and S. Bandyopadhyay, Energy Storage Design Using Physics-Based Battery Models in Hybrid Power Systems with Uncertainties, paper presented in the 236th The Electrochemical Society (ECS) Meeting, Atlanta, United States, October 13-17, 2019.
  36. K. Aviso, S. Jain, S. Bandyopadhyay, J. Pimentel, R. Tan and F. Fridler, Optimization of Enhanced Weathering Networks with P-Graph and Pinch Analysis, paper presented in the 8th International Congress on Sustainability Science & Engineering, Kuala Lumpur, Malaysia, July 1-3, 2019.
  37. S. Jain, K. Aviso, J. Pimentel, S. Bandyopadhyay, R. Tan and F. Fridler, P-Graph Approach for Optimization of Segregated Targeting Networks, paper presented in the 8th International Congress on Sustainability Science & Engineering, Kuala Lumpur, Malaysia, July 1-3, 2019.
  38. M. Maheshwari, A. Jana and S. Bandyopadhyay, Optimizing the modal split to reduce carbon dioxide emission for resource-constrained societies, paper presented in the 15th World Conference on Transport Research, Mumbai, India, May 26-31, 2019.
  39. M.P. Bonkile, S. Bandyopadhyay and V. Ramadesigan, Energy Storage Design Using Physics-Based Models in Standalone PV-Battery Hybrid Systems, paper presented in the 12th International Conference on Thermal Engineering: Theory and Applications, Gandhinagar, India, February 23-26, 2019.
  40. S. Kamat and S. Bandyopadhyay, Heat Integration in Water Networks with Non-Isothermal mixing, paper presented in the 12th International Conference on Thermal Engineering: Theory and Applications, Gandhinagar, India, February 23-26, 2019.
  41. S. Jain and S. Bandyopadhyay, Pinch analysis approach for multiple objective segregated targeting problems, paper presented in the 12th International Conference on Thermal Engineering: Theory and Applications, Gandhinagar, India, February 23-26, 2019.
  42. D. Arya and S. Bandyopadhyay, Stochastic Pinch Analysis for Resource Allocation Networks with Multiple Resources, paper presented in the 21st Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2018) in conjunction with 24th International Congress of Chemical and Process Engineering (CHISA), Praha, Czech Republic, August 27-31, 2018.
  43. S. Jain and S. Bandyopadhyay, Multiple-Index Pinch Analysis for Segregated Targeting Problems, paper presented in the 2nd International Conference on Sustainability and Process Engineering (SPIL 2018), Brno, Czech Republic, August 30-31, 2018.
  44. S. Jain and S. Bandyopadhyay, Extending Pinch Analysis to Address Forbidden Matches in Resource Allocation Networks, paper presented in the 21st Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2018) in conjunction with 24th International Congress of Chemical and Process Engineering (CHISA), Praha, Czech Republic, August 27-31, 2018.
  45. S. Kamat, S. Bandyopadhyay, A. Garg, D.C.Y. Foo, and G.C. Sahu, Heat Integrated Water Regeneration Networks with Variable Regeneration Parameters, paper presented in the 21st Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2018) in conjunction with 24th International Congress of Chemical and Process Engineering (CHISA), Praha, Czech Republic, August 27-31, 2018.
  46. R.R. Tan, D.C.Y. Foo, S. Bandyopadhyay, K.B. Aviso, and D.K.S. Ng, A Mixed Integer Linear Programming (MILP) Model for Optimal Operation of Industrial Resource Conservation Networks (RCNs) under Abnormal Conditions, Proceedings of the European Symposium on Computer Aided Process Engineering-27 (ESCAPE-27), Barcelona, Spain, October 1-5, 2017.
  47. P.S. Roychaudhuri, S. Bandyopadhyay, D.C.Y. Foo, R. R. Tan, and V. Kazantzi, A Pinch Analysis Approach to Project Selection Problem, paper presented in the 6th International Symposium on Advanced Control of Industrial Processes, Taipei, Taiwan, May 27-31, 2017.
  48. S. Jain and S. Bandyopadhyay, Segregated Targeting for Resource Allocation Networks with Dedicated Sources, paper presented in the 6th International Symposium on Advanced Control of Industrial Processes, Taipei, Taiwan, May 27-31, 2017.
  49. R. R. Tan, S. Bandyopadhyay, and D.C.Y. Foo, Pinch Analysis Approach to Optimal Planning of Biochar-Based Carbon Management Networks, paper presented in the 6th International Symposium on Advanced Control of Industrial Processes, Taipei, Taiwan, May 27-31, 2017.
  50. M. Patole, R. R. Tan, S. Bandyopdhyay, and D. C. Y. Foo, Pinch Analysis Approach to Energy Planning Using Weighted Composite Quality Index, paper presented in the 19th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2016) in conjunction with 22nd International Congress of Chemical and Process Engineering (CHISA), Praha, Czech Republic, August 27-31, 2016.
  51. D. Mathew, A. Shukla, and S. Bandyopadhyay, Modified predictive current control of Neutral-Point Clamped converter with reduced switching frequency, Proceedings of the IEEE Applied Power Electronics Conference and Exposition (APEC), pp. 3286-3290, Long Beach, USA, March 21-24, 2016.
  52. B. R. Nandi, R. Banerjee, and S. Bandyopadhyay, Energy and Exergy Analyses in Molten Salt Based Thermocline Thermal Storage for Solar Thermal Power Plant, paper presented in the 5th International Conference on Advances in Energy Research (ICAER 2015), Mumbai, India, December 15-17, 2015.
  53. M. S. Thakare, P. C. Ghosh, and S. Bandyopadhyay, Utilization of Excess Energy in the Sizing of Photovoltaic-thermal System (PVT) Using Design Space Approach, Proceedings of the 3rd Postgraduate Colloquium for Environmental Research 2015 (POCER 2015), pp. 1609-1614, Kuching, Malaysia, August 24-26, 2015.
  54. Krishna Priya G. S. and S. Bandyopadhyay, A Pinch Analysis Based Approach to Power System Planning with Carbon Capture, Proceedings of the 3rd Postgraduate Colloquium for Environmental Research 2015 (POCER 2015), pp. 1603-1608, Kuching, Malaysia, August 24-26, 2015.
  55. N. B. Desai and S. Bandyopadhyay, Comparison of Parabolic Trough and Linear Fresnel Collectors Based Concentrating Solar Power Plants Using Organic Rankine Cycle, Proceedings of the 3rd Postgraduate Colloquium for Environmental Research 2015 (POCER 2015), pp. 1597-1602, Kuching, Malaysia, August 24-26, 2015.
  56. P. Sharan and S. Bandyopadhyay, Integration of Multiple Effect Evaporators with Background Process, Proceedings of the 3rd Postgraduate Colloquium for Environmental Research 2015 (POCER 2015), pp. 1591-1596, Kuching, Malaysia, August 24-26, 2015.
  57. P. C. Ghosh, S. Bandyopadhyay, Krishna Priya G. S., and P. Sharan, Design Space Approach for Storage Sizing of Hydrogen Fuel Cell Systems Through Pinch Analysis, Proceedings of the 18th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015), pp. 1105-1110, Kuching, Malaysia, August 23-27, 2015.
  58. Krishna Priya G. S., S. Bandyopadhyay, and R. R. Tan, Multi-objective Pinch Analysis with Multiple Resources, Proceedings of the 18th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015), pp. 823-828, Kuching, Malaysia, August 23-27, 2015.
  59. N. B. Desai and S. Bandyopadhyay, Selection of Working Fluid for an Organic Rankine Cycle Based Concentrating Solar Thermal Power Plant, Proceedings of the 18th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015), pp. 811-816, Kuching, Malaysia, August 23-27, 2015.
  60. S. Bandyopadhyay, N. B. Desai, and A. Kashyap, A New Approach Towards Carbon-constrained Energy Sector Planning: A Case Study for Lakshadweep Islands, India, Proceedings of the 18th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015), pp. 637-642, Kuching, Malaysia, August 23-27, 2015.
  61. M. S. Thakare, P. C. Ghosh, and S. Bandyopadhyay, Optimal Sizing of a Photovoltaic-thermal Hybrid System Using Energy Ratio, Proceedings of the 18th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015), pp. 373-378, Kuching, Malaysia, August 23-27, 2015.
  62. P. Sharan and S. Bandyopadhyay, Integration of Multiple Effect Evaporators with Solar Thermal Systems, Proceedings of the 18th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015), pp. 181-186, Kuching, Malaysia, August 23-27, 2015.
  63. N. D. Chaturvedi, Z. A. Manan, S. R. Wan Alwi, and S. Bandyopadhyay, A Linear Mathematical Model to Determine the Minimum Utility Targets for a Batch Process, Proceedings of the 18th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015), pp. 115-120, Kuching, Malaysia, August 23-27, 2015.
  64. M. H. Bade and S. Bandyopadhyay, Energy Modelling of Thermal Oil Based Cooking System, Proceedings of the 7th International Conference on Applied Energy, Abu Dhabi, United Arab Emirates, March 28-31, 2015.
  65. S. K. Thengane, S. Bandyopadhyay, S. Mitra, S. Bhattacharya, and A. Hoadley, A New Alternative Process for Nitric Acid Production Based on Chemical Looping Approach, AIChE Annual Meeting 2014, Atlanta, USA, Nov 16, 2014.
  66. Krishna Priya G. S., S. Bandyopadhyay, and H. Pillai, Optimum Source Sizing to Satisfy Time Varying Demand, Proceedings of the 2nd International Conference on Green Energy & Technology, Dhaka, Bangladesh, September 5-6, 2014.
  67. Krishna Priya G. S. and S. Bandyopadhyay, Screening Curve Method for Optimum Source Sizing to Satisfy Time Varying Demand, Proceedings of the European Symposium on Computer Aided Process Engineering -24 (ESCAPE-24), Budapest, Hungary, June 15-18, 2014.
  68. A. Jhaveri and S. Bandyopadhyay, Incorporating the Effect of Time-Of-Use Tariffs in the Extended Conservation Supply Curve, paper presented in the International Conference on Energy and Management, Istanbul, Turkey, June 5-7, 2014.
  69. R. R. Tan and S. Bandyopadhyay, Pinch Analysis for Multi-Dimensional Sustainable Energy Systems Planning, Proceedings of the 4th International Conference on Advances in Energy Research (ICAER 2013), Mumbai, India, December 10-12, 2013.
  70. N.G.R. Kartheek, D. Yadav, R. Banerjee, J.K. Nayak, S. Bandyopadhyay, and S.B. Kedare, Experiences in Commissioning of a 1MWe Solar Thermal Power Plant in Gurgaon, Proceedings of the 4th International Conference on Advances in Energy Research (ICAER 2013), Mumbai, India, December 10-12, 2013.
  71. M.S. Thakare, S. Bandyopadhyay, and P.C. Ghosh, Design and performance evaluation of prototype Photovoltaic Thermal (PVT) collector, Proceedings of the 4th International Conference on Advances in Energy Research (ICAER 2013), Mumbai, India, December 10-12, 2013.
  72. L.K. Sahoo, S. Bandyopadhyay, and R. Banerjee, Benchmarking Energy Efficiency of Opencast Mining in India, Proceedings of the 4th International Conference on Advances in Energy Research (ICAER 2013), Mumbai, India, December 10-12, 2013.
  73. N.B. Desai, S. Bandyopadhyay, J.K. Nayak , R. Banerjee, and S.B. Kedare, Simulation of 1MWe Solar Thermal Power Plant, ISES Solar World Congress, Cancun, Mexico, November 3-7, 2013.
  74. N. Chaturvedi and S. Bandyopadhyay, Targeting Minimum Fresh Water Requirement for Batch Processes with Flexible Schedule, Proceedings of the 6th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia, June 25-27, 2013.
  75. J. Diamante, R. Tan, D. Foo, D. Ng, K. Aviso, and S. Bandyopadhyay, Unified Graphical Pinch Approach for Targeting of CCS Systems Over Multiple Time Periods, Proceedings of the 6th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia, June 25-27, 2013.
  76. Krishna Priya G. S., R. Tan, and S. Bandyopadhyay, Emission Constrained Power System Planning with Carbon Capture and Storage, Proceedings of the 6th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia, June 25-27, 2013.
  77. R. R. Tan and S. Bandyopadhyay, Trigeneration System: Visualization Through Ternary Diagrams, paper presented in the 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012) in conjunction with 26th Symposium of Malaysian Chemical Engineers (SOMChE 2012), Kota Kinabalu, Malaysia, November 21-23, 2012.
  78. B. R. Nandi, S. Bandyopadhyay, and R. Banerjee, Analysis of High Temperature Thermal Energy Storage for Solar Power Plant, paper presented in the 3rd IEEE International Conference on Sustainable Energy Technologies (ICSET'12), art. no. 6357438, pp. 438-444, Kathmandu, Nepal, September 24-27, 2012.
  79. O. Adekola, J. D. Stamp, T. Majozi, A. Garg, and S. Bandyopadhyay, A Unified Approach for the Optimization of Energy and Water in Multipurpose Batch Plants, Proceedings of the 11th International Symposium on Process Systems Engineering, Singapore, July 15-19, 2012.
  80. M. H. Bade and S. Bandyopadhyay, Targeting Minimum Heat Transfer Fluid Flow for Multiple Heat Demands, Proceedings of the 11th International Symposium on Process Systems Engineering, Singapore, July 15-19, 2012.
  81. N. Chaturvedi and S. Bandyopadhyay, Minimization of storage requirement in a batch process using pinch analysis, Proceedings of the 11th International Symposium on Process Systems Engineering, Singapore, July 15-19, 2012.
  82. R. R. Tan, R. Ooi, D. C. Y. Foo, D. K. S. Ng, K. B. Aviso, and S. Bandyopadhyay, A Graphical Approach to Optimal Source-Sink Matching in Carbon Capture and Storage Systems with Reservoir Capacity and Injection Rate Constraints, Proceedings of the 11th International Symposium on Process Systems Engineering, Singapore, July 15-19, 2012.
  83. N. B. Desai and S. Bandyopadhyay, Solar Thermal Power Plant Simulator. International Conference on Energy Security, Global Warming and Sustainable Climate (SOLARIS 2012), Varanasi, India, February 7-9, 2012.
  84. R. R. Tan, K. B. Aviso, S. Bandyopadhyay, and D. K. S. Ng, A Multi-Period Integer Programming Model for Optimal Source-Sink Matching in Carbon Capture and Storage Systems with Time Constraints, paper presented in the 31st Annual PAASE Meeting and Symposium, Manila, Philippines, June 15-18, 2011.
  85. G.S. Krishna Priya and S. Bandyopadhyay, Optimum Sizing of Standalone Photovoltaic Thermal (PVT) Systems using Design Space Approach, paper presented in the 31st Annual PAASE Meeting and Symposium, Manila, Philippines, June 15-18, 2011.
  86. G. C. Sahu and S. Bandyopadhyay, Energy targeting in heat integrated water networks with isothermal mixing, Proceedings of European Symposium on Computer Aided Process Engineering -21 (ESCAPE-21), Thessaloniki, Greece, May 29-June 1, 2011.
  87. S. Bandyopadhyay, Design of renewable energy systems incorporating uncertainties through pinch analysis, Proceedings of European Symposium on Computer Aided Process Engineering -21 (ESCAPE-21), Thessaloniki, Greece, May 29-June 1, 2011.
  88. N. Parikh, S. Patwardhan, S. Bandyopadhyay, R. Gudi, Control of a nuclear steam generator using feedback-feedforward LQG controller, International Symposium on Advanced Control of Industrial Processes (ADCONIP), Hangzhou, China, May 23-26, 2011.
  89. G. C. Sahu and S. Bandyopadhyay, Minimization of Resource Requirement and Inter-Plant Cross Flow Across Resource Allocation Networks, paper presented in the 14th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2011) in conjunction with 10th International Conference on Chemical and Process Engineering (ICheaP), Florence, Italy, May 8-11, 2011.
  90. S. Bandyopadhyay and G. C. Sahu, Pinch Analysis: A Method to Conserve Resources, Proceedings of the International Conference on Thermal Energy and Environment (INCOTEE 2011), Krishnankoil, India, March 24-26, 2011.
  91. S. Bandyopadhyay, Application of Process Integration Principles to Design Isolated Energy Systems, Proceedings of the 5th International Symposium on Design Operation and Control of Chemical Processes (PSE-Asia 2010), Singapore, 472-481, July 25-28, 2010.
  92. G. C. Sahu and S. Bandyopadhyay, Energy Integration Across Multiple Water Allocation Networks, Proceedings of the 5th International Symposium on Design Operation and Control of Chemical Processes (PSE-Asia 2010), Singapore, 403-412, July 25-28, 2010.
  93. Sreeraj E. S., K. Chatterjee, and S. Bandyopadhyay, Sizing of Isolated Renewable Hybrid Systems, paper presented in the 2nd International Conference on Nuclear and Renewable Energy Resources, Ankara, Turkey, July 5-7, 2010.
  94. L. Sahoo, S. Bandyopadhyay, and R. Banerjee, Energy Performance of Dump Trucks in Opencast Mine, paper presented in the 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2010), Lausanne, Switzerland, June 14-17, 2010.
  95. A. Roy, S. B. Kedare, and S. Bandyopadhyay, Design of Wind Power Generation Systems for Industrial Application Incorporating Resource Uncertainty, paper presented in the 12th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2009) in conjunction with the 9th International Conference on Chemical and Process Engineering (ICheaP), Rome, Italy, May 10-13, 2009.
  96. V. Bansal and S. Bandyopadhyay, Targeting for Cogeneration Systems, paper presented in the 11th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2008) in conjunction with 18th International Congress of Chemical and Process Engineering (CHISA), Praha, Czech Republic, August 24-28, 2008.
  97. N. B. Desai and S. Bandyopadhyay, Process Integration of Organic Rankine Cycle, paper presented in the 11th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2008) in conjunction with 18th International Congress of Chemical and Process Engineering (CHISA), Praha, Czech Republic, August 24-28, 2008.
  98. J. Varghese and S. Bandyopadhyay, Targeting and Integration of Total Site, paper presented in the 11th Conference on Process Integration, Modeling and Optimisation for Energy Saving and Pollution Reduction (PRES 2008) in conjunction with 18th International Congress of Chemical and Process Engineering (CHISA), Praha, Czech Republic, August 24-28, 2008.
  99. C. C. Cormos and S. Bandyopadhyay, Process Water Management with Regeneration and Recycle, Proceedings of European Symposium on Computer Aided Process Engineering -17 (ESCAPE-17), Bucharest, 1343-1348, May 27-30, 2007.
  100. S. Bandyopadhyay and C. C. Cormos, Minimum Reflux in Liquid - Liquid Extraction, Proceedings of European Symposium on Computer Aided Process Engineering -17 (ESCAPE-17), Bucharest, May 27-30, 2007.
  101. G. N. Kulkarni, S. B. Kedare, and S. Bandyopadhyay, An Approach for Improvement in Solar Water Heating Systems, Proceedings of the 1st National Conference on Advances in Energy Research (AER 2006), Mumbai, 170-175, December 4-5, 2006.
  102. S. Bandyopadhyay, Teaching Thermodynamics Through Fallacies, Proceedings of the 1st National Conference on Advances in Energy Research (AER 2006), Mumbai, 285-290, December 4-5, 2006.
  103. Arun P., R. Banerjee, and S. Bandyopadhyay, Sizing Curve for Design of Isolated Power Systems, Proceedings of the 1st National Conference on Advances in Energy Research (AER 2006), Mumbai, 239-244, December 4-5, 2006.
  104. G. N. Kulkarni, S. B. Kedare, and S. Bandyopadhyay, Application of Design Space Approach to Solar Water Heating Systems with Pressurized Storage, Proceedings of the 1st National Conference on Advances in Energy Research (AER 2006), Mumbai, 195-200, December 4-5, 2006.
  105. S. Bandyopadhyay, Thermal Integration of a Distillation Column through Side-exchangers, IChemE Symposium Series-152, Proceedings of the 8th Distillation and Absorption Conference, London (UK), 162-171, September 4-6, 2006.
  106. S. Bandyopadhyay, Extended Smokers' Equation for Calculating Number of Stages in Distillation, IChemE Symposium Series-152, Proceedings of the 8th Distillation and Absorption Conference, London (UK), 937-944, September 4-6, 2006.
  107. J. Varghese and S. Bandyopadhyay, Integration of Fired Heaters into Total Site, Proceedings of the 19th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy System (ECOS 2006), Crete (Greece), Volume 2, 715-722, July 12-14, 2006.
  108. J. Varghese and S. Bandyopadhyay, Targeting for Energy Integration of Multiple Fired Heaters, Proceedings of the 19th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy System (ECOS 2006), Crete (Greece), Volume 2, 723-730, July 12-14, 2006.
  109. R. N. Patel, S. Bandyopadhyay, and A. Ganesh, Effect of Pressure, Temperature and Extraction Time on Supercritical Fluid Extraction of Cashew Nut Shells, Paper presented in the 8th International Conference on Supercritical Fluids and Their Applications, Ischia (Italy), May 28-31, 2006.
  110. G. N. Kulkarni, S. B. Kedare, and S. Bandyopadhyay, The Concept of Design Space for Sizing Solar Hot Water Systems, Proceedings of International Congress on Renewable Energy (ICORE), Hyderabad, 302-306, February 8-11, 2006.
  111. R. N. Patel, S. Bandyopadhyay, and A. Ganesh, Cost Optimization for Clean Manufacturing: Supercritical Fluid Extraction of Cashew Nut Shells, Paper presented in Ex-Tech-2006, York (U.K.), February 6-8, 2006.
  112. R. N. Patel, S. Bandyopadhyay, and A. Ganesh, Selective Extraction of Cardanol and Phenols from Cashew Nut Shell Liquid Obtained Through Pyrolysis of Cashew Nut Shells, Paper presented in 58th Indian Chemical Engineering Congress (ChemCon2005), Delhi, December 14-17, 2005.
  113. R. N. Patel, S. Bandyopadhyay, and A. Ganesh, Selective Extraction of Phenols from Sugarcane Bagasse Pyrolysis Oil, Proceedings of the 10th European Meeting on Supercritical Fluids, Colmar (France), December 12-14, 2005.
  114. V. Dafane and S. Bandyopadhyay, Target and Synthesis of Cogeneration System, Paper presented in the National Conference on Energy Management in Changing Business Scenario, BITS-Pilani, October 8-9, 2005.
  115. B. F. Deshmukh, R. K. Malik, and S. Bandyopadhyay, Efficient Feed Preheat Targeting for Distillation by Feed Splitting, Proceedings of European Symposium on Computer Aided Process Engineering -15 (ESCAPE-15), Barcelona, 751-756, May 29- June 1, 2005.
  116. J. Varghese and S. Bandyopadhyay, Thermo-economic Optimization of Fired Heater Integrated Processes, Proceedings of the Second International Conference on Applied Thermodynamics, Istanbul, 65-72, May 18-20, 2005.
  117. A. Bhakta and S. Bandyopadhyay, Constructal Optimization of Top Contact Metallization of A Photovoltaic Solar Cell, Proceedings of the Second International Conference on Applied Thermodynamics, Istanbul, 197-204, May 18-20, 2005.
  118. S. Bandyopadhyay and S. Bandyopadhyay, Heat Recovery and Energy Integration in Sulfur Recovery Unit, Paper presented in First Indo-US Joint Conference of IIChE and AIChE, Mumbai, December 27-30, 2004.
  119. A. Babar, P. Donde, B. Samyal, and S. Bandyopadhyay, Thermodynamic analysis of combined cycle heat engines, Paper presented in 57th Indian Chemical Engineering Congress (ChemCon2004), Mumbai, December 27-30, 2004. [This paper was presented in the thermodynamic session and was awarded the First prize.]
  120. J. Varghese and S. Bandyopadhyay, Energy Integration of Fired Heater, Proceedings of International Mechanical Engineering Conference (IMEC-2004), Kuwait, Book 2, 30-46, December 5-8, 2004.
  121. A. Bang, S. Bandyopadhyay, and U. N. Gaitonde, Modeling of Tube-Fin Shell and Tube Compact Heat Exchanger, Proceedings of XVII National and VI ISHMT/ASME Heat and Mass Transfer Conference, Kalpakkam, 436-440, January 5-7,2004.
  122. B. F. Deshmukh, R. K. Malik, and S. Bandyopadhyay, Feed Preheat Targeting to Minimise Energy Consumption in Distillation, Proceedings of International Symposium on Process Systems Engineering and Control (ISPSEC'03), Mumbai, 104-109, January 3-4, 2003.
  123. M. K. Joshi, D. R. Roy, and S. Bandyopadhyay, Design of Energy Efficient Crude Distillation Unit, Presented at 4th International Petroleum Conference (PETROTECH), New Delhi, January 9-12, 2001.
  124. D. K. Gupta, S. K. Saxena, S. Handa, and S. Bandyopadhyay, Assessment of Energy Conservation Potential in Petroleum Refineries Through Benchmarking & Targeting Techniques, Proceedings of National Symposium on Energy Management and Conservation in Heavy Water Plants and Allied Chemical Industries (EMCON-2000), Mumbai, 33-38, 2000.
  125. S. Bandyopadhyay, N. C. Bera, and S. Bhattacharyya, Thermoeconomic Optimization of Combined-Cycle Power Plants, Presented at IASTED International Conference on Power and Energy Systems, Las Vegas, November 8-10, 1999.
  126. S. Bandyopadhyay and N. C. Bera, Cost Optimum Design of an Endoreversible Carnot-Like Heat Engine, Presented at 49th Indian Chemical Engineering Congress (ChemCon'96), Ankleshawar, December 18-21, 1996.



Magazine and Brochure Articles

  1. G. C. Sahu and S. Bandyopadhyay, Holistic Approach for Resource Conservation, Chemical Engineering World, 104-108, December, 2011.
  2. S. Bandyopadhyay and S. Bandyopadhyay, To Infinity with Harmony, Breakthrough, 11(3), 31-35, February, 2006.
  3. S. Bandyopadhyay and S. Bandyopadhyay, Recreational Mathematics, Breakthrough, 10(3), April, 2004.
  4. S. Bandyopadhyay and G. Prasad, Energy Saving by Using Variable Frequency Drives in Air-cooled Heat Exchangers, EIL Technical Brochure on Oil Conservation Fortnight, 2-6, 2001.
  5. S. Bandyopadhyay, D. K. Gupta, and M. K. Joshi, Energy, Yield Optimization, Configuration Study, and Other Services Offered By EIL, EIL Technical Brochure on Oil Conservation Fortnight, 7-17, 2001.
  6. S. Bandyopadhyay and P. Bandyopadhyay, The Last Theorem and the First Proof, Breakthrough, May, 1999.
  7. S. Bandyopadhyay, Paradoxes in Probability, Breakthrough, April, 1992.
  8. S. Bandyopadhyay, Sum of Two Squares, Mathematical Gazette, 75(474), 464, 1991.