Publications

List
Filter

Found 78 results

]

Filters: First Letter Of Title is C [Clear All Filters]

2015

Desai, N. B., and S. Bandyopadhyay. "Comparison of parabolic trough and linear Fresnel collectors based concentrating solar power plants using organic Rankine cycle." Chemical Engineering Transactions 45 (2015): 1597-1602.

Shriniwasan, S., H. Goswami, H. - Y. Tien, M. Tanniru, F. Ebrahimi, and S. S. V. Tatiparti. "Contributions of multiple phenomena towards hydrogenation: A case of Mg." International Journal of Hydrogen Energy 40 (2015): 13518-13529.

2016

Shukla, S., A. Ghosh, U. K. Sen, P. K. Roy, S. Mitra, and B. Lochab. "Cardanol benzoxazine-Sulfur Copolymers for Li-S batteries: Symbiosis of Sustainability and Performance." ChemistrySelect 1 (2016): 594-600.

Nalajala, N., A. Chakraborty, B. Bera, and M. Neergat. "Chloride (Cl-) ion-mediated shape control of palladium nanoparticles." Nanotechnology 27 (2016).

Shah, P. R., and A. Ganesh. "A comparative study on influence of fuel additives with edible and non-edible vegetable oil based on fuel characterization and engine characteristics of diesel engine." Applied Thermal Engineering 102 (2016): 800-812.

Kulkarni, O. V., S. Doolla, and B. G. Fernandes. "Compensator-less structures for droop control of single phase inverters in a flexible microgrid." In Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC, 2245-2251. Vol. 2016-May., 2016.

Bandyopadhyay, S., and N. B. Desai. "Cost optimal energy sector planning: a Pinch Analysis approach." Journal of Cleaner Production 136 (2016): 246-253.

Majumder, S., S. A. Khaparde, V. Pradhan, S. V. Kulkarni, A. P. Agalgaonkar, S. Perera, and P. Ciufo. "A critical review on the methods for calculating the risk of process failure because of voltage sags." In 2016 IEEE International Conference on Power System Technology, POWERCON 2016., 2016.

Sinha, A., M. Bliss, X. Wu, S. Roy, R. Gottschalg, and R. Gupta. "Cross-characterization for imaging parasitic resistive losses in thin-film photovoltaic modules." Journal of Imaging 2 (2016).

Kumar, A., K. R. Balasubramaniam, J. Kangsabanik, Vikram, and A. Alam. "Crystal structure, stability, and optoelectronic properties of the organic-inorganic wide-band-gap perovskite CH3NH3BaI3: Candidate for transparent conductor applications." Physical Review B 94 (2016).

2017

Solanki, C. S., and H. K. Singh. "c-Si solar cells: Physics and technology." Green Energy and Technology (2017): 17-42.

Nehe, P., S. Kumar, and V. M. Reddy. "Characteristics of hydrogen produced by methanol reformation in compact whirling orbital plate fluidized bed reactor." In 11th Asia-Pacific Conference on Combustion, ASPACC 2017. Vol. 2017-December., 2017.

Pandey, V., and S. Singh. "Characterization of stability limits of Ledinegg instability and density wave oscillations for two-phase flow in natural circulation loops." Chemical Engineering Science 168 (2017): 204-224.

Rao, A. B., and P. C. Phadke. "CO2 Capture and Storage in Coal Gasification Projects." In IOP Conference Series: Earth and Environmental Science. Vol. 76., 2017.

Malik, S. N., P. C. Ghosh, A. N. Vaidya, V. Waindeskar, S. Das, and S. N. Mudliar. "Comparison of coagulation, ozone and ferrate treatment processes for color, COD and toxicity removal from complex textile wastewater." Water Science and Technology 76 (2017): 1001-1010.

Arora, P., A. F. A. Hoadley, S. M. Mahajani, and A. Ganesh. "Compartment model for a dual fluidized bed biomass gasifier." Chemical Engineering Research and Design 117 (2017): 274-286.

Dhara, A., S. K. Sarkar, and S. Mitra. "Controlled 3D Carbon Nanotube Architecture Coated with MoOx Material by ALD Technique: A High Energy Density Lithium-Ion Battery Electrode." Advanced Materials Interfaces 4 (2017).

Bhanushali, S., P. C. Ghosh, G. P. Simon, and W. Cheng. "Copper Nanowire-Filled Soft Elastomer Composites for Applications as Thermal Interface Materials." Advanced Materials Interfaces 4 (2017).

Jacob, A. S., J. Das, A. P. Abraham, R. Banerjee, and P. C. Ghosh. "Cost and Energy Analysis of PV Battery Grid Backup System for a Residential Load in Urban India." In Energy Procedia, 88-94. Vol. 118., 2017.

Shendage, D. J., S. B. Kedare, and S. L. Bapat. "Cyclic analysis and optimization of design parameters for Beta-configuration Stirling engine using rhombic drive." Applied Thermal Engineering 124 (2017): 595-615.

2018

Saini, R. K., P. P. Wangikar, and M. Bose. "CFD analysis of the flow dynamics of microorganisms in dilute cultures in stirred tank photobioreactors." Bioresource Technology Reports 3 (2018): 238-246.

Goenka, R., S. Mukherji, and P. C. Ghosh. "Characterization of electrochemical behaviour of Escherichia coli MTCC 1610 in a microbial fuel cell." Bioresource Technology Reports 3 (2018): 67-74.

Saha, D., P. Misra, M. Joshi, and L. M. Kukreja. "Comment on “Structural and Electrical Properties of Atomic Layer Deposited Al-Doped ZnO Films”." Advanced Functional Materials 28 (2018).

Yadav, D., and R. Banerjee. "A comparative life cycle energy and carbon emission analysis of the solar carbothermal and hydrometallurgy routes for zinc production." Applied Energy 229 (2018): 577-602.

Choudhury, D., G. Rajaraman, and S. K. Sarkar. "Comparison on atomic/molecular layer deposition grown aluminum alkoxide polymer films using alkane and alkyne organic precursors." Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films 36 (2018).

Department of Energy Science and Engineering Indian Institute of Technology Bombay Powai, Mumbai - 400076, INDIA